International Journal of Metrology and Quality Engineering

Open Access

Conformity and statistical tolerancing 1

Laurent Leblond and Maurice Pillet

Published online: 05 February 2018

DOI: https://doi.org/10.1051/ijmqe/2017023

• Abstract
• Full HTML
• PDF (981.2 KB)
• ePUB (1.451 MB)
• References

Open Access

An overview of Quality Management System implementation in a research laboratory 2

Valérie Molinéro-Demilly, Abdérafi Charki, Christine Jeoffrion, Barbara Lyonnet, Steve O'Brien and Luc Martin

Published online: 05 February 2018

DOI: https://doi.org/10.1051/ijmqe/2017025

• Abstract
• Full HTML
• PDF (524.6 KB)
• ePUB (1.362 MB)
• References

Open Access

A new approach to the analysis of Type 1 non-uniqueness of the ITS-90 above 0 °C 3

Sonia Gaita and Georges Bonnier

Published online: 10 April 2018

DOI: https://doi.org/10.1051/ijmqe/2017026

• Abstract
• Full HTML
• PDF (2.670 MB)
• ePUB (4.847 MB)
• References

Open Access

Linking results of key and supplementary comparisons of AC/DC voltage transfer references 4

Oleh Velychko

Published online: 09 April 2018

DOI: https://doi.org/10.1051/ijmqe/2018002

• Abstract
• Full HTML
• PDF (2.227 MB)
• ePUB (2.638 MB)
• References

Open Access

Review

Control chart applications in healthcare: a literature review 5

Gaurav Suman and DeoRaj Prajapati

Published online: 18 May 2018

DOI: https://doi.org/10.1051/ijmqe/2018003

• Abstract
• Full HTML
• PDF (1.482 MB)
• ePUB (2.889 MB)
• References

Open Access

Occupational health and safety in the Moroccan construction sites: preliminary diagnosis 6

Bakeli Tarik and Hafidi Alaoui Adil

Published online: 18 May 2018

DOI: https://doi.org/10.1051/ijmqe/2018005

• Abstract
• Full HTML
• PDF (2.583 MB)
• ePUB (2.658 MB)
• References

Open Access

Comparison tests for the determination of the viscosity values of reference liquids by capillary viscometers and stabinger viscometer SVM 3001 7

Gokce Sevim Sariyerli, Orhan Sakarya and Umit Yuksel Akcadag

Published online: 01 June 2018

DOI: https://doi.org/10.1051/ijmqe/2018004

• Abstract
• Full HTML
• PDF (1.321 MB)
• ePUB (2.546 MB)
• References

Open Access

Results of the round robin calibration of reference solar cells within the PhotoClass project 8

Ingo Kröger, Dirk Friedrich, Stefan Winter, Elena Salis, Harald Müllejans, Diego Pavanello, Jochen Hohl-Ebinger, Karsten Bothe, David Hinken, Sebastian Dittmann et al. (8 more)

Published online: 17 October 2018

DOI: https://doi.org/10.1051/ijmqe/2018006

• Abstract
• Full HTML
• PDF (819.7 KB)
• ePUB (1.806 MB)
• References

Open Access

Temperature effect in the calibration of capacitive humidity sensors 9

Sergio A. Carvajal and Ciro A. Sánchez

Published online: 29 October 2018

DOI: https://doi.org/10.1051/ijmqe/2018010

• Abstract
• Full HTML
• PDF (631.0 KB)
• ePUB (1.479 MB)
• References

Open Access

How to measure test repeatability when stability and constant variance are not observed 10

Gary G. Jing

Published online: 30 October 2018

DOI: https://doi.org/10.1051/ijmqe/2018007

• Abstract
• Full HTML
• PDF (1.422 MB)
• ePUB (2.330 MB)
• References

Open Access

Application of process mapping for digitization of mechanical parts with 3D laser scanner 11

Antonio Piratelli-Filho, Alberto José Alvares and Rosenda Valdés Arencibia

Published online: 16 November 2018

DOI: https://doi.org/10.1051/ijmqe/2018009

• Abstract
• Full HTML
• PDF (2.008 MB)
• ePUB (2.752 MB)
• References

Open Access

Evaluation of measurement uncertainty for the determination of the mechanical resistance of the brick samples by using uniaxial compressive strength test 12

Klodian Dhoska, Saimir Tola, Agus Pramono and Indrit Vozga

Published online: 16 November 2018

DOI: https://doi.org/10.1051/ijmqe/2018012

• Abstract
• Full HTML
• PDF (375.5 KB)
• ePUB (1.483 MB)
• References

Open Access

Evaluation of InGaAs/InP photodiode for high-speed operation at 4 K 13

Eivind Bardalen, Bjørnar Karlsen, Helge Malmbekk, Muhammed Nadeem Akram and Per Ohlckers

Published online: 20 November 2018

DOI: https://doi.org/10.1051/ijmqe/2018015

• Abstract
• Full HTML
• PDF (1.199 MB)
• ePUB (2.718 MB)
• References

Open Access

The incorporation of virtual ergonomics to improve the occupational safety condition in a factory 14

Karin Kandananond

Published online: 20 November 2018

DOI: https://doi.org/10.1051/ijmqe/2018013

• Abstract
• Full HTML
• PDF (2.014 MB)
• ePUB (2.408 MB)
• References

Open Access

Influence of the probing definition on the flatness measurement 15

Djezouli Moulai-khatir, Eric Pairel and Hugues Favreliere

Published online: 22 November 2018

DOI: https://doi.org/10.1051/ijmqe/2018011

• Abstract
• Full HTML
• PDF (3.378 MB)
• ePUB (2.289 MB)
• References

Open Access

Characterisation of chemically related asbestos amphiboles of actinolite: proposal for a specific differentiation in the diagram (Si apfu versus Mg/Mg+Fe²⁺) 16

Maxime Misseri and Didier Lahondere

Published online: 14 December 2018

DOI: https://doi.org/10.1051/ijmqe/2018014

• Abstract
• Full HTML
• PDF (1.495 MB)
• ePUB (3.414 MB)
• References

Open Access

Extending dew-point temperature scale up to +50 °C 17

Doaa Mohamed Abd El-Gelil and Mohamed Gamal Ahmed

Published online: 18 December 2018

DOI: https://doi.org/10.1051/ijmqe/2018017

• Abstract
• Full HTML
• PDF (1.003 MB)
• ePUB (1.627 MB)
• References

Open Access

Applied signal effect in the potentiometric method on the resistance measurements accuracy 18

Rasha S.M. Ali

Published online: 18 December 2018

DOI: https://doi.org/10.1051/ijmqe/2018018

• Abstract
• Full HTML
• PDF (466.6 KB)
• ePUB (1.405 MB)
• References