International Journal of Metrology and Quality Engineering (IJMQE)

The International Journal of Metrology and Quality Engineering (IJMQE) is devoted to articles dealing with applied metrology and quality tools for process improvement in industry and in research (in environment, health, food, energy, aerospace, automotive, …).

Open Access

Coefficients of static and dynamic friction of ceramic floor tiles: proposal of new method of surface roughness determination

Aline Demarch, Elcio Angioletto, Angela W. Vieira, Andreza Dal Molin, Oscar Rubem K. Montedo and Elidio Angioletto

Int. J. Metrol. Qual. Eng., 10 (2019) 4

Published online: 26 April 2019
Open Access

Assessing interlaboratory comparison data adjustment procedures

Kavya Jagan and Alistair B. Forbes

Int. J. Metrol. Qual. Eng., 10 (2019) 3

Published online: 18 April 2019
Open Access

Quality assurance in planning a radon measurement survey using PDCA cycle approach: what improvements?

Giuseppe La Verde, Vincenzo Roca and Mariagabriella Pugliese

Int. J. Metrol. Qual. Eng., 10 (2019) 2

Published online: 16 April 2019
Open Access

Data comparisons and uncertainty: a roadmap for gaining in competence and improving the reliability of results

Abdérafi Charki and Franco Pavese

Int. J. Metrol. Qual. Eng., 10 (2019) 1

Published online: 08 January 2019
Open Access

Extending dew-point temperature scale up to +50 °C

Doaa Mohamed Abd El-Gelil and Mohamed Gamal Ahmed

Int. J. Metrol. Qual. Eng., 9 (2018) 17

Published online: 18 December 2018
Open Access

Applied signal effect in the potentiometric method on the resistance measurements accuracy

Rasha S.M. Ali

Int. J. Metrol. Qual. Eng., 9 (2018) 18

Published online: 18 December 2018
Open Access

Characterisation of chemically related asbestos amphiboles of actinolite: proposal for a specific differentiation in the diagram (Si apfu versus Mg/Mg+Fe²⁺)

Maxime Misseri and Didier Lahondere

Int. J. Metrol. Qual. Eng., 9 (2018) 16

Published online: 14 December 2018

Most read articles

201	Open Access Review Statistical tools and approaches to validate analytical methods: methodology and practical examples Soumia Belouafa, Fatima Habti, Saïd Benhar, Bouchaïb Belafkih, Souad Tayane, Souad Hamdouch, Ahmed Bennamara and Abdelmjid Abourriche Int. J. Metrol. Qual. Eng., 8 (2017) 9 Published online: 08 March 2017
67	Open Access An overview of Quality Management System implementation in a research laboratory Valérie Molinéro-Demilly, Abdérafi Charki, Christine Jeoffrion, Barbara Lyonnet, Steve O'Brien and Luc Martin Int. J. Metrol. Qual. Eng., 9 (2018) 2 Published online: 05 February 2018
66	Open Access Critical analysis of the acceptance criteria used in measurement systems evaluation Suelí Fischer Beckert and Wagner Saucedo Paim Int. J. Metrol. Qual. Eng., 8 (2017) 23 Published online: 05 October 2017
41	Open Access Review Some important features of the proposed new definition of the International System of Units (SI): realization and hierarchical problems that the users should know about Franco Pavese and Abdérafi Charki Int. J. Metrol. Qual. Eng., 7 4 (2016) 403 Published online: 21 November 2016
40	Open Access Assessing interlaboratory comparison data adjustment procedures Kavya Jagan and Alistair B. Forbes Int. J. Metrol. Qual. Eng., 10 (2019) 3 Published online: 18 April 2019

962	Open Access Review Statistical tools and approaches to validate analytical methods: methodology and practical examples Soumia Belouafa, Fatima Habti, Saïd Benhar, Bouchaïb Belafkih, Souad Tayane, Souad Hamdouch, Ahmed Bennamara and Abdelmjid Abourriche Int. J. Metrol. Qual. Eng., 8 (2017) 9 Published online: 08 March 2017
396	Open Access An overview of Quality Management System implementation in a research laboratory Valérie Molinéro-Demilly, Abdérafi Charki, Christine Jeoffrion, Barbara Lyonnet, Steve O'Brien and Luc Martin Int. J. Metrol. Qual. Eng., 9 (2018) 2 Published online: 05 February 2018
371	Open Access Critical analysis of the acceptance criteria used in measurement systems evaluation Suelí Fischer Beckert and Wagner Saucedo Paim Int. J. Metrol. Qual. Eng., 8 (2017) 23 Published online: 05 October 2017
284	Open Access Review Control chart applications in healthcare: a literature review Gaurav Suman and DeoRaj Prajapati Int. J. Metrol. Qual. Eng., 9 (2018) 5 Published online: 18 May 2018
184	Open Access Comparison tests for the determination of the viscosity values of reference liquids by capillary viscometers and stabinger viscometer SVM 3001 Gokce Sevim Sariyerli, Orhan Sakarya and Umit Yuksel Akcadag Int. J. Metrol. Qual. Eng., 9 (2018) 7 Published online: 01 June 2018

3280	Open Access Review Statistical tools and approaches to validate analytical methods: methodology and practical examples Soumia Belouafa, Fatima Habti, Saïd Benhar, Bouchaïb Belafkih, Souad Tayane, Souad Hamdouch, Ahmed Bennamara and Abdelmjid Abourriche Int. J. Metrol. Qual. Eng., 8 (2017) 9 Published online: 08 March 2017
1250	Open Access An overview of Quality Management System implementation in a research laboratory Valérie Molinéro-Demilly, Abdérafi Charki, Christine Jeoffrion, Barbara Lyonnet, Steve O'Brien and Luc Martin Int. J. Metrol. Qual. Eng., 9 (2018) 2 Published online: 05 February 2018
1118	Open Access Critical analysis of the acceptance criteria used in measurement systems evaluation Suelí Fischer Beckert and Wagner Saucedo Paim Int. J. Metrol. Qual. Eng., 8 (2017) 23 Published online: 05 October 2017
845	Open Access Review Control chart applications in healthcare: a literature review Gaurav Suman and DeoRaj Prajapati Int. J. Metrol. Qual. Eng., 9 (2018) 5 Published online: 18 May 2018
644	Open Access Review Some important features of the proposed new definition of the International System of Units (SI): realization and hierarchical problems that the users should know about Franco Pavese and Abdérafi Charki Int. J. Metrol. Qual. Eng., 7 4 (2016) 403 Published online: 21 November 2016

International Journal of Metrology and Quality Engineering (IJMQE)

Most read articles

News