International Journal of Metrology and Quality Engineering

Open Access

Editorial

Special issue: IMEKO Technical Committee 21 (Part II) p. 1

Franco Pavese and Alistair B. Forbes

Published online: 05 June 2013

DOI: https://doi.org/10.1051/ijmqe/2012030

• Abstract
• PDF (25.94 KB)

Open Access

Effect of sampling strategy on uncertainty and precision of flatness inspection studied by dynamic minimum deviation zone evaluation p. 3

A. Barari and S. Mordo

Published online: 05 June 2013

DOI: https://doi.org/10.1051/ijmqe/2012039

• Abstract
• PDF (1.370 MB)
• References

Open Access

Uncertainty evaluation by gamma transmission measurements and CFD model comparison in a FCC cold pilot unit p. 9

C.C. Dantas, A.E. Moura, H.J.B. de Lima Filho, S.B. Melo, V.A. Dos Santos and E.A.O. Lima

Published online: 05 June 2013

DOI: https://doi.org/10.1051/ijmqe/2012031

• Abstract
• PDF (1.204 MB)
• References

Open Access

Uncertainty associated with form assessment in coordinate metrology p. 17

A.B. Forbes

Published online: 05 June 2013

DOI: https://doi.org/10.1051/ijmqe/2012032

• Abstract
• PDF (180.9 KB)
• References

Open Access

Evaluation of the R&R and the compatibility index for non-independent measurements p. 23

A. Garcia-Benadí, E. Molino-Minero-Re, J. del Río-Fernández and A. Mànuel-Lázaro

Published online: 05 June 2013

DOI: https://doi.org/10.1051/ijmqe/2012033

• Abstract
• PDF (540.3 KB)
• References

Open Access

Calculation of measurement uncertainty for plastic (ABS) material in flexural testing p. 29

A. Gunay, S. Fank, T. Gulmez and N.M. Durakbasa

Published online: 05 June 2013

DOI: https://doi.org/10.1051/ijmqe/2012034

• Abstract
• PDF (436.8 KB)
• References

Open Access

Relationship between measurement uncertainty and verifiability of geometric specifications: the case study of drilled hole orthogonality p. 35

D. Vetturi, M. Lancini, I. Bodini and S. Pasinetti

Published online: 05 June 2013

DOI: https://doi.org/10.1051/ijmqe/2012035

• Abstract
• PDF (781.8 KB)
• References

Open Access

Rounding, stipulation and notation issues in measurement p. 41

F. Pavese

Published online: 05 June 2013

DOI: https://doi.org/10.1051/ijmqe/2012036

• Abstract
• PDF (113.2 KB)
• References

Open Access

Optimization of accelerated testing through design of experiment for ageing of lead-free electronic interconnection material p. 47

M. Catelani, V.L. Scarano and R. Berni

Published online: 05 June 2013

DOI: https://doi.org/10.1051/ijmqe/2012037

• Abstract
• PDF (609.5 KB)
• References

Open Access

An improved procedure for combining Type A and Type B components of measurement uncertainty p. 55

R. Willink

Published online: 05 June 2013

DOI: https://doi.org/10.1051/ijmqe/2012038

• Abstract
• PDF (230.8 KB)
• References