International Journal of Metrology and Quality Engineering

Open Access

The influence of geometrical tolerances of Vickers indenter on the accuracy of measured hardness p. 1

M. El-Sherbiny, R. Hegazy, M. Ibrahim and A. Abuelezz

Published online: 26 September 2012

DOI: https://doi.org/10.1051/ijmqe/2012009

• Abstract
• PDF (1.229 MB)
• References

Open Access

Generation of 656 nm coherent red-light by frequency-doubled Nd:YLiF₄/β-BaB₂O₄ laser for a compact silver atoms optical clock p. 7

J.-P. Loisel, S. Topsu, L. Chassagne, Y. Alayli, P.R. Dahoo and P. Juncar

Published online: 26 September 2012

DOI: https://doi.org/10.1051/ijmqe/2012008

• Abstract
• PDF (1.106 MB)
• References

Open Access

Calculation of measurement uncertainty for cellulose based transformed board material in tensile testing p. 15

S. Fank and B. Aydemir

Published online: 26 September 2012

DOI: https://doi.org/10.1051/ijmqe/2012007

• Abstract
• PDF (434.8 KB)
• References

Open Access

Uncertainty evaluation for the gauge blocks calibration using the modified DMDM gauge block interferometer p. 19

V. Zivkovic, S. Zelenika and G. Stefanovic

Published online: 26 September 2012

DOI: https://doi.org/10.1051/ijmqe/2012001

• Abstract
• PDF (960.6 KB)
• References

Open Access

Importance and estimation of mismatch uncertainty for RF parameters in calibration laboratories p. 29

K. Patel and P.S. Negi

Published online: 26 September 2012

DOI: https://doi.org/10.1051/ijmqe/2012005

• Abstract
• PDF (279.7 KB)
• References

Open Access

Measurement uncertainty evaluation of automatic Tan Delta and resistivity test set for transformer oil p. 39

N.K. Mandavgade, S.B. Jaju and R.R. Lakhe

Published online: 26 September 2012

DOI: https://doi.org/10.1051/ijmqe/2012004

• Abstract
• PDF (692.2 KB)
• References

Open Access

Control of involute curve of gear tooth using the fuzzy logic p. 47

B. Bloul and A. Bourdim

Published online: 26 September 2012

DOI: https://doi.org/10.1051/ijmqe/2012003

• Abstract
• PDF (949.3 KB)
• References

Open Access

Evaluation of metrology technologies for free form surfaces p. 55

K. Arámbula, H.R. Siller, L. De Chiffre, C.A. Rodríguez and A. Cantatore

Published online: 26 September 2012

DOI: https://doi.org/10.1051/ijmqe/2012002

• Abstract
• PDF (633.6 KB)
• References