Open Access
Issue
Int. J. Metrol. Qual. Eng.
Volume 3, Number 1, 2012
Page(s) 29 - 37
DOI https://doi.org/10.1051/ijmqe/2012005
Published online 26 September 2012
  1. E. Hund, Microwave Communication – Components and Circuits (McGraw-Hill Book Company, 1987) [Google Scholar]
  2. G. Kennedy, Electronic Communication Systems (McGraw-Hill Education, Ltd., India, 1994) [Google Scholar]
  3. R.W. Beatty, Mismatch errors in the measurement of ultrahigh frequency and microwave variable attenuators, Journal of Research National Bureau of Standards 52, 7–9 (1954) [CrossRef] [Google Scholar]
  4. G.E. Schafer, A.Y. Rumfelt, Mismatch errors in the cascade-connected variable attenuators, IRE Transactions of Microwave Theory and Techniques 7, 447–453 (1959) [CrossRef] [Google Scholar]
  5. Microwave mismatch error analysis, Hewlett-Packard Application note 56, 1967 [Google Scholar]
  6. R.W. Beatty, Microwave Attenuation measurements and standards, NBS Monograph 97 (1967) [Google Scholar]
  7. Microwave measurements, edited by R. Collier, D. Skinner (IET Publication, 2009) [Google Scholar]
  8. D.L. Hollway, F.P. Kelly, A standard attenuator and the Precise measurement of Attenuation, IEEE Trans. Instrum. Meas. 13, 33–44 (1964) [CrossRef] [Google Scholar]
  9. S. Whitacre, Dee Humpherys, Low level power measurement techniques and accuracy, HP RF & Microwave measurement symposium and exhibition (USA, 1968) [Google Scholar]
  10. G.F. Engen, Recent development in the field of microwave power measurements at the National Bureau of Standards, IRE Trans. Instrum. 3, 304–306 (1958) [CrossRef] [Google Scholar]
  11. R.W. Beatty, Coaxial Power, impedance and attenuation calibration methods at NBS, Microwave J., 65–75 (1968) [Google Scholar]
  12. ISO, ISO/IEC 17025, General requirements for the competence of testing and calibration laboratories (2005) [Google Scholar]
  13. Guidelines on the evaluation and expression of the measurement uncertainty, Singapore Institute of Standards and Industrial Research (1995) [Google Scholar]
  14. Guide to the expression of uncertainty in measurement, Geneva, International Organization for Standardization (1993) [Google Scholar]
  15. EA Guidelines on the Evaluation of Vector Network Analyzers (VNA), Publication reference EUROMET/cg-12/v0.1 (2007) [Google Scholar]
  16. G.H. Bryant, Principles of microwave measurements (Peter Peregrinus Ltd., 1988) [Google Scholar]
  17. F.L. Warner,Microwave Attenuation measurement (Peter Peregrinus Ltd., 1977) [Google Scholar]
  18. A.E. Bailey, Microwave measurements (IEE Publication, 1989) [Google Scholar]
  19. Horst Bayer, F.L. Warner, R.W. Yell, Attenuation and Ratio – National Standards, Proc. IEEE 74, 46–59 (1986) [CrossRef] [Google Scholar]
  20. H. Bayer, An error analysis for the RF attenuation measuring equipment of the PTB applying the power method, Metrologia 11, 43–51 (1975) [CrossRef] [Google Scholar]
  21. F.L. Warner, New expression for mismatch uncertainty when measuring microwave attenuation, IEE Proc. 127, 66–69 (1980) [Google Scholar]
  22. R.S. Yadava, R. Swarup, K. Chandra, Technical report on Audio frequency substitution technique for measurement of Microwave attenuation, Report No. MWA-1, 1983 [Google Scholar]
  23. R. Swarup, R.S. Yadava, K. Chandra, Technical report on Microwave attenuation measurement by IF substitution technique, Report No. MWA-2, 1983 [Google Scholar]
  24. I.A. Harris, F.L. Warner, Re-examination of mismatch uncertainty when measuring microwave power and attenuation, IEEProc. 128, 35–41 (1981) [Google Scholar]
  25. B.O. Weinschel, Standardization of precision coaxial connectors, Proc. IEEE 55, 923–931 (1967) [CrossRef] [Google Scholar]
  26. Coaxial connectors in Radio frequency and microwave measurements, NAMAS, NIS 4303 (1991), Vol. 1 [Google Scholar]
  27. D. Skinner, ANAMET Connector guide-Guidance on using Coaxial connectors in measurement, ANAMET Report 032, 2001 [Google Scholar]
  28. IEEE Std. 287-2007, IEEE Standard for Precision coaxial connectors (DC to 110 GHz) (IEEE Instrumentation and Measurement Society, USA, 2007) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.