Open Access
Issue
Int. J. Metrol. Qual. Eng.
Volume 8, 2017
Article Number 27
Number of page(s) 12
DOI https://doi.org/10.1051/ijmqe/2017022
Published online 17 November 2017
  1. H. Preston-Thomas, Metrologia 27, 3 (1990); Errata 27, 107 (1990) [Google Scholar]
  2. F. Pavese, Metrologia 42, 194 (2005) [Google Scholar]
  3. F. Pavese, Advances in Cryogenic Engineering (Plenum Press, New York, 2006), Vol. 52, p. 451 [Google Scholar]
  4. F. Pavese, P.P.M. Steur, N. Bancone, D. Ferri, D. Giraudi, Metrologia 47, 499 (2010) [Google Scholar]
  5. F. Pavese, W.L. Tew, Comité Consultatif de Thermométrie (CCT) Working Document, Doc. CCT/00-9, Bureau International des Poids et Mesures, Sèvres, 2000 [Google Scholar]
  6. B. Fellmuth, L. Wolber, Y. Hermier, F. Pavese, P.P.M. Steur, I. Peroni, A. Szmyrka-Grzebyk, L. Lipinski, W.L. Tew, T. Nakano, H. Sakurai, O. Tamura, D. Head, K.D. Hill, A.G. Steele, Metrologia 42, 171 (2005) [Google Scholar]
  7. J.V. Nicholas, D.R. White, T.D. Dransfield, in Proceedings of TEMPMEKO, 1996, Torino, edited by P. Marcarino (Levrotto and Bella, Torino, 1997), p. 9 [Google Scholar]
  8. D.R. White, T.D. Dransfield, G.F. Strouse, W.L. Tew, R.L. Rusby, J. Gray, in Proceedings of the Eighth International Temperature Symposium on Temperature, Its Measurement and Control in Science and Industry, 2002, edited by D. Ripple (AIP, New York, 2002), p. 221 [Google Scholar]
  9. V. Faghihi, A. Peruzzi, A.T. Aerts-Bijma, H.G. Jansen, J.J. Spriensma, J. van Geel, H.A.J. Meijer, Metrologia 52, 819 (2015) [Google Scholar]
  10. V. Faghihi, M. Kozicki, A.T. Aerts-Bijma, H.G. Jansen, J.J. Spriensma, A. Peruzzi, H.A.J. Meijer, Metrologia 52, 827 (2015) [Google Scholar]
  11. F. Pavese, B. Fellmuth, D. Head, Y. Hermier, K.D. Hill, S. Valkiers, Anal. Chem. 77, 5076 (2005) [CrossRef] [PubMed] [Google Scholar]
  12. B. Fellmuth, L. Wolber, D. Head, Y. Hermier, K.D. Hill, T. Nakano, F. Pavese, A. Peruzzi, V. Shkraba, A.G. Steele, P.P.M. Steur, A. Szmyrka-Grzebyk, W.L. Tew, L. Wang, D.R. White, Metrologia 49, 257 (2012) [Google Scholar]
  13. F. Pavese, P.P.M. Steur, Y. Hermier, K.D. Hill, K.J. Seog, L. Lipinski, K. Nagao, T. Nakano, A. Peruzzi, F. Sparasci, A. Szmyrka-Grzebyk, O. Tamura, W.L. Tew, V. Valkiers, J. van Geel, in Proceedings of the Ninth International Temperature Symposium on Temperature, Its Measurement and Control in Science and Industry, 2012, AIP Conf. Proc. (2013), Vol. 1552, p. 192 [Google Scholar]
  14. P.P.M. Steur, F. Pavese, B. Fellmuth, Y. Hermier, K.D. Hill, K.J. Seog, L. Lipinski, K. Nagao, T. Nakano, A. Peruzzi, F. Sparasci, A. Szmyrka-Grzebyk, O. Tamura, W.L. Tew, S. Valkiers, J. van Geel, Metrologia 52, 104 (2015) [Google Scholar]
  15. P.P.M. Steur, Y. Inseok, K.J. Seok, T. Nakano, K. Nagao, F. Pavese, in Proceedings of TEMPMEKO 2016,Zakopane, submitted to IUPAC PAC [Google Scholar]
  16. A. El Matarawy, M.G. Ahmed, Int. J. Metrol. Qual. Eng. 5, 401 (2014); A. El Matarawy, M.G. Ahmed, Int. J. Metrol. Qual. Eng. 7, 107 (2016) [CrossRef] [EDP Sciences] [Google Scholar]
  17. C. Cappella, F. Sparasci, L. Pitre, B. Buée, A. El Matarawy, Int. J. Metrol. Qual. Eng. 6, 405 (2015) [CrossRef] [EDP Sciences] [Google Scholar]
  18. CCT-K1 (NPL Pilot), http://kcdb.bipm.org/appendixB/KCDB_ApB_info.asp?cmp_idy=453&cmp_cod=CCT-K1&prov=exalead [Google Scholar]
  19. CCT-K2 (NRC Pilot), http://kcdb.bipm.org/appendixB/KCDB_ApB_info.asp?cmp_idy=454&cmp_cod=CCT-K2&prov=exalead [Google Scholar]
  20. CCT-K7 (BIPM Pilot), http://kcdb.bipm.org/appendixB/KCDB_ApB_info.asp?cmp_idy=459&cmp_cod=CCT-K7&prov=exalead [Google Scholar]
  21. CCT-K1.1 (NIST (Pilot), NMIJ-AIST), http://kcdb.bipm.org/appendixB/KCDB_ApB_info.asp?cmp_idy=794&cmp_cod=CCT-K1.1&prov=exalead [Google Scholar]
  22. EUROMET.T-K1 (INRIM, INTiBS, NPL, PTB (Pilot), VSL), http://kcdb.bipm.org/appendixB/KCDB_ApB_info.asp?cmp_idy=1290&cmp_cod=EURAMET.T-K1&prov=exalead (Final Report). C. Gaiser, B. Fellmuth, P.P.M. Steur, A. Szmyrka-Grzebyk, H. Manuszkiewicz, L. Lipinski, A. Peruzzi, R.L. Rusby, D. Head, Metrologia 54, Technical Suppl. 03002 (2017) [Google Scholar]
  23. CCT-K2.1 (NRC (Pilot), VNIIFTRI), http://kcdb.bipm.org/appendixB/KCDB_ApB_info.asp?cmp_idy=697&cmp_cod=CCT-K2.1&prov=exalead [Google Scholar]
  24. CCT-K2.4 (INTiBS, LNE, NRC (Pilot)), http://kcdb.bipm.org/appendixB/KCDB_ApB_info.asp?cmp_idy=745&cmp_cod=CCT-K2.4&prov=exalead [Google Scholar]
  25. CCT-K2.3 (NMI-VSL, NRC (Pilot)), http://kcdb.bipm.org/appendixB/KCDB_ApB_info.asp?cmp_idy=744&cmp_cod=CCT-K2.3&prov=exalead [Google Scholar]
  26. CCT-K2.5 (INRIM, NMIJ-AIST, NRC (Pilot)), K.D. Hill, T. Nakano, P.P.M. Steur, Metrologia 52, Technical Suppl. 03003 (2015) http://kcdb.bipm.org/appendixB/KCDB_ApB_info.asp?cmp_idy=771&cmp_cod=CCT-K2.5&prov=exalead [Google Scholar]
  27. CCT-K2.2 (INRIM, NIM, NRC (Pilot)), not completed yet [Google Scholar]
  28. EUROMET-K7.1 (NMI-VSL (Pilot), several others), http://kcdb.bipm.org/appendixB/KCDB_ApB_participant.asp?cmp_idy=789&cmp_cod=EUROMET.T-K7&prov=exalead [Google Scholar]
  29. http://kcdb.bipm.org/appendixB/KCDB_ApB_info.asp?cmp_idy=855&cmp_cod=APMP.T-K7&prov=exalead [Google Scholar]
  30. BIPM, CIPM Recommendation 2 (CI-2005): clarification of the definition of the Kelvin, unit of thermodynamic temperature, http://www.bipm.org/en/si/si_brochure/chapter2/2-1/kelvin.html [Google Scholar]
  31. BIPM, Mise en pratique for the definition of the Kelvin and its Technical Annex 2014, http://www.bipm.org/en/si/si_brochure/chapter2/2-1/kelvin.html [Google Scholar]
  32. W.L. Tew, C.W. Meyer, Doc. CCT/08-09, BIPM, Sèvres, 2009 [Google Scholar]
  33. P.P.M. Steur, D. Giraudi, in Proceedings of the Ninth International Temperature Symposium on Temperature, Its Measurement and Control in Science and Industry, 2012, Amer. Inst. Phys. Conf. Proc. (American Institute of Physics, New York, 2013), Vol. 1552, p. 124 [Google Scholar]
  34. F. Pavese, J. Ancsin, D.N. Astrov, J. Bonhoure, G. Bonnier, G.T. Furukawa, R.C. Kemp, H. Maas, R.L. Rusby, H. Sakurai, Ling Shankang, Metrologia 20, 127 (1984). Full Report available as: F. Pavese, Final Report, Monograph 84/4 of Bureau International des Poids et Mesures, BIPM Sèvres (1984) pp. 1–219 (http://www.bipm.org/en/publications/monographies-misc.html). In the format of a CCT-KC: F. Pavese, Comptes Rendus Comité Consultatif de Thermométrie, BIPM, Sèvres, Doc. CCT/2000-7, 2000 [Google Scholar]
  35. F. Pavese, Int. J. Thermophys. 35, 1077 (2014) [Google Scholar]
  36. M.E. Wieser, T.B. Coplen, Pure Appl. Chem. 83, 359 (2011) [Google Scholar]
  37. F. Pavese, P.P.M. Steur, S. Valkier, T. Nakano, H. Sakurai, O. Tamura, A. Peruzzi, B. Fellmuth, L. Wolber, L. Lipinski, A. Szmyrka-Grzebyk, W.L. Tew, K.D. Hill, A.D. Steele, Y. Hermier, F. Sparasci, Int. J. Thermophys. 31, 1633 (2010) [Google Scholar]
  38. F. Pavese, B. Fellmuth, D. Head, Y. Hermier, A. Peruzzi, A. Szmyrka Grzebyk, L. Zanin, in Proceedings of the Eighth International Temperature Symposium on Temperature, Its Measurement and Control in Science and Industry, 2002, edited by D. Ripple (Amer. Inst. Phys., New York, 2003), p. 161 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.