International Journal of Metrology and Quality Engineering

Open Access

The management of measurement processes – key to robust and cost optimal production of high quality products p. 1

R. Schmitt, J. Lose and M. Harding

Published online: 03 May 2010

DOI: https://doi.org/10.1051/ijmqe/2010010

• Abstract
• PDF (624.6 KB)
• References

Open Access

On hierarchical vs. non-hierarchical comparisons in metrology and testing p. 7

F. Pavese

Published online: 19 April 2010

DOI: https://doi.org/10.1051/ijmqe/2010004

• Abstract
• PDF (232.3 KB)
• References

Open Access

Road safety and metrology: what’s binomial? p. 11

M. do Céu Ferreira and A. Cruz

Published online: 10 May 2010

DOI: https://doi.org/10.1051/ijmqe/2010005

• Abstract
• PDF (296.1 KB)
• References

Open Access

From opacimetry to nanoparticle characterization: regulation, research and new national standards for exhaust gas analyzers in Europe p. 17

P. Ulbig

Published online: 19 April 2010

DOI: https://doi.org/10.1051/ijmqe/2010006

• Abstract
• PDF (302.0 KB)
• References

Open Access

Recent advances in digital particle image velocimetry methods for flow motion analysis p. 21

H. Nasibov and S. Baytaroglu

Published online: 19 April 2010

DOI: https://doi.org/10.1051/ijmqe/2010007

• Abstract
• PDF (456.8 KB)
• References

Open Access

Method development for the analysis of biodegradable polymers p. 29

E. Vuorinen and M. Hakkarainen

Published online: 19 April 2010

DOI: https://doi.org/10.1051/ijmqe/2010008

• Abstract
• PDF (576.8 KB)
• References

Open Access

Morphology and properties of polymer matrix nanocomposites p. 33

Salah H.R. Ali, M.K. Bedewy, M.A. Etman, H.A. Khalil and B.S. Azzam

Published online: 19 April 2010

DOI: https://doi.org/10.1051/ijmqe/2010009

• Abstract
• PDF (1.986 MB)
• References

Open Access

Improvements in calibration at silver or Copper point p. 41

J. P. Tavener

Published online: 19 April 2010

DOI: https://doi.org/10.1051/ijmqe/2010011

• Abstract
• PDF (570.9 KB)
• References

Open Access

Reliability of photovoltaic modules based on climatic measurement data p. 45

R. Laronde, A. Charki and D. Bigaud

Published online: 19 April 2010

DOI: https://doi.org/10.1051/ijmqe/2010012

• Abstract
• PDF (799.8 KB)
• References

Open Access

Comparison of the GUM and Monte Carlo measurement uncertainty techniques with application to effective area determination in pressure standards p. 51

V. Ramnath

Published online: 19 April 2010

DOI: https://doi.org/10.1051/ijmqe/2010013

• Abstract
• PDF (365.6 KB)
• References