Open Access
Issue
Int. J. Metrol. Qual. Eng.
Volume 1, Number 1, 2010
Page(s) 1 - 6
DOI https://doi.org/10.1051/ijmqe/2010010
Published online 03 May 2010
  1. B. Bunday et al., Value-Added Metrology, IEEE Trans. Semicond. Manuf. 20, 266 (2007) [CrossRef]
  2. H. Kunzmann, T. Pfeifer, R. Schmitt, H. Schwenke, A. Weckenmann, Productive Metrology – Adding Value to Manufacture, Ann. CIRP 54, 691 (2005)
  3. W. Thomson, Electrical Units of Measurement, Popular Lecture an Addresses, Vol. I (Macmillan, London, 1883), p. 73
  4. A. Aamodt, M. Nygård, Data Knowledge Eng. 16, 191 (1995) [CrossRef]
  5. C. Shannon, A Mathematical Theory of Communication, Bell Syst. Tech. J. 27, 379, 623 (1948)
  6. F. de Saussure, Grundfragen der allgemeinen Sprachwissenschaft, 3rd edn. (De Gruyter, 2001)
  7. K. North, Wissensorientierte Unternehmensführung – Wertschöpfung durch Wissen, 2nd edn. (Gabler, 1999)
  8. J.-R. Ohm, H. Lüke, Signalübertragung, 7th edn. (Springer, 2005)
  9. A. Picot, R. Reichwald, R. Wigang, Die grenzenlose Unternehmung – Information, Organisation und Management, 5th edn. (Gabler, 2003)
  10. R. Schmitt, B. Damm, P. Hafner, Machine-Vision-Based Automated Tool Wear Inspection System, in Proceedings of the 18th IMEKO TC2 Symposium (2008), pp. 1–6
  11. T. Pfeifer, Production Metrology (2002), pp. 1–2
  12. T. Pfeifer et al., Measuring flank tool wear on cutting tools with machine vision – a case solution, in 9th IEEE Conference on Mechatronics and Machine Vision in Practice (2002), pp. 169–175
  13. G. Schuh et al., Intelligent Maintenance – Potentiale zustandsorientierter Instandhaltung (2005), p. 6
  14. H. Braeunlich, Blecheinzugsregelung beim Tiefziehen mit Niederhalter – ein Beitrag zur Erhöhung der Prozessstabilität (Verlag Wissenschaftliches Scripten, 2002), pp. 19–20
  15. R. Ofen et al., Qualitätsdatenaustauschformat der Automobilindustrie AQDEF, workgroup paper version 2.0.1, http://www.q-das.de/fileadmin/files2/datafomat/Specification_AQDEF_V3-0.pdf, 2008
  16. G. Schuh et al., Designing services based on ‘intelligent’ press-die-systems, Advances in Life Cycle Engineering for Sustainable Manufacturing Businesses, in Proceedings of the 14th CIRP Conference on Life Cycle Engineering (2007), pp. 201–205
  17. R. Schmitt et al., Anlage, Werkzeug, Betreiber – Produktionseffizienz durch Anwenderorientierung, Wettb- ewerbsfaktor Produktionstechnik Aachener Perspekti- ven, in Proceedings of the AWK 2008, pp. 391–417
  18. R. Brinkmann, Measurement System Analysis (MSA) und Prüfprozesseignung (Richtlinie VDA5), in VDI Berichte 1913 (VDI-Verlag, 2005), pp. 63–71
  19. DINV ENV 13005, Guide to the Expression of Uncertainty in Measurement, German Version ENV 13005 (1999)
  20. Measurement System Analysis (MSA), 3rd edn. (2002)
  21. VDA 5 - Qualitätsmanagement in der Automobilindustrie, Prüfprozesseignung, 1st edn. (Verband der Automobilin- dustrie, 2003)
  22. DIN ISO/TS15330-3, Geometrische Produktspezifikation (GPS) – Verfahren zur Ermittlung der Messunsicherheit von Koordinatenmessgeräten (KMG) – Teil 3: Anwendung von kalibrierten Werkstücken oder Normalen (2008)
  23. JCGM 101:2008, Evaluation of measurement data – Supplement 1 to the “Guide to the expression of uncertainty in measurement” – Propagation of distributions using a Monte Carlo method (2008)

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.