Open Access
| Issue |
Int. J. Metrol. Qual. Eng.
Volume 14, 2023
|
|
|---|---|---|
| Article Number | 14 | |
| Number of page(s) | 8 | |
| DOI | https://doi.org/10.1051/ijmqe/2023014 | |
| Published online | 14 November 2023 | |
- O.J.R. Baena, Baldosas cerámicas y gres porcelánico : un mundo en permanente evolución, 1. Ed. (Centro Editorial Facultad de Minas, Medellín, Colombia, 2011) [Google Scholar]
- International Organization for Standardization. ISO. Norma. ISO 13006: Ceramic tiles — Definitions, classification, characteristics and marking, Geneva, Switzerland, 2018, p. 1–53 [Google Scholar]
- A.P. Menegazzo, Estudo da correlação entre a microestrutura e as propriedades finais de revestimentos cerâmicos do tipo grês porcelanato. Orientador: Dr. José Octavio Armani Paschoal. 2001. 291 f. Tese (Doutorado em Ciências na Área de Tecnologia Nuclear − Materiais) − IPEN-USP, São Paulo, 2001 [Google Scholar]
- A.P.N. Oliveira, D. Hotza, Tecnologia de fabricação de revestimentos cerâmicos, Editora da UFSC 2, 1–118 (2015) [Google Scholar]
- G. Biffi, Defeitos de Fabricação de placas cerâmicas, 1. ed. (Faenza Editrice do Brasil, Rio Claro, Brasil, 2000) [Google Scholar]
- J.V. Abellán-nebot, Derivation and application of the stream of variation model to the manufacture of ceramic floor tiles, Qual. Eng. 4, 713–729 (2018) [CrossRef] [Google Scholar]
- W.E. Deming, Out of the crisis, (Center for Advanced Engineering Study, Massachusetts Institute of Technology, Cambridge, 1986) [Google Scholar]
- International Organization for Standardization. ISO. Norma. ISO 10545 Ceramic tiles — Part 2: Determination of dimensions and surface quality. Geneva, Switzerland, 2018, p. 1–13 [Google Scholar]
- S. Fazio et al., New instruments for determining dimensional characteristics of large size tiles (QUALICER: World Congress on Ceramic Tile Quality, Castellón − Spain, 2018), p. 1–11 [Google Scholar]
- Automotive In dustry Action Group (AIAG), Measurement systems analysis (MSA): reference manual, 4 ed. (AIAG, Michigan, USA, 2010) [Google Scholar]
- R.S. Arenhart, M. Pizzolato, Análise de Sistemas de Medição em uma Máquina de Medir por Coordenadas, Rev. FSA, Teresina, 6, 182–203 (2020) [Google Scholar]
- P. Klaput et al., Problems of application of measurement system analysis (MSA) in metallurgical production. Metalurgija, Ostrava, Czech Republic, 2016, Vol. 3, p. 535–537 [Google Scholar]
- R.B.D. Pereira et al., Combining Scott-Knott and GR&R methods to identify special causes of variation, Measurement, Brasil, 82, 135–144, (2016) [CrossRef] [Google Scholar]
- S.H.R. Ali, J. Buajarern, New method and uncertainty estimation for plate dimensions and surface measurements, J. Phys.: Conf. Ser. Taipei, 483, 1–14 (2014) [Google Scholar]
- S.M. Emam, S.A. Sayyedbarzani, Dimensional deviation measurement of ceramic tiles according to ISO 10545–2 using the machine vision, Int. J. Adv. Manuf. Technol. 5, 1405–1418 (2019) [CrossRef] [Google Scholar]
- A. Sioma, Automated control of surface defects on ceramic tiles using 3D image analysis, Mater. Poland, 5, 1–13, (2020) [Google Scholar]
- Centro Cerâmico do Brasil − CCB, Parecer técnico. Programa Setorial da Qualidade de Placas Cerâmicas para Revestimento: Relatório Setorial n°42. Santa Gertrudes − São Paulo, 1–70 (2022) [Google Scholar]
- International Organization for Standardization. ISO. Norma. ISO 10545 Ceramic tiles — Part 4: Determination of modulus of rupture and breaking strength. Geneva, Switzerland, 2019, p. 1–8. [Google Scholar]
- D.C. Montgomery, Introduction to statistical quality control (John Wiley & Sons, United States of America, Inc, 2009), p. 6. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.