Open Access
Int. J. Metrol. Qual. Eng.
Volume 8, 2017
Article Number 12
Number of page(s) 8
Published online 19 May 2017
  1. A. Desrochers, A. Rivière, A matrix approach to the representation of tolerance zones and clearances, Int. J. Adv. Manuf. Technol. 13, 630 (1997) [CrossRef] [Google Scholar]
  2. P. Bourdet, L. Mathieu, C. Lartigue, A. Ballu, The concept of the small displacement torsor in metrology, Ser. Adv. Math. Appl. Sci. 40, 110 (1996) [Google Scholar]
  3. M. Kamalinejad, F. Vignat, F. Villeneuve, Simulation of the geometrical defects of manufacturing, Int. J. Adv. Manuf. Technol. 45, 631 (2009) [CrossRef] [Google Scholar]
  4. S. Tichadou, M.K. Nejad, F. Vignat, O. Legoff, 3D manufacturing dispersions: two experimental applications, in 10th CIRP International Seminar on Computer Aided Tolerancing, Paris (2007) [Google Scholar]
  5. M.H. Bui, A. Sergent, F. Villeneuve, Model of manufactured part and Monte Carlo simulation with experimental data, in 12th CIRP Conference on Computer Aided Tolerancing Manufacturing Tolerance Analysis (2010), Vol. 22 [Google Scholar]
  6. B.-F. Alistair, Least squares best-fit geometric elements, NPL Report DITC Affiliation (Nationale Physical Laboratory, 1989) [Google Scholar]
  7. M.H. Bui, Identification et simulation des incertitudes de fabrication, PhD from the University of Grenoble, 2011 [Google Scholar]
  8. A. Rivière, A. Clément, M. Temmerman, Cotation Tridimensionnelle des Systèmes Mécaniques (Pyc livres, Paris, 1994) [Google Scholar]
  9. A. Clément, Une science nommée technologie, Technol. Form. 108, 32 (2003) [Google Scholar]
  10. A. Duret, Capabilité et pilotage d'un processus d'usinage, Technol. Form. 115, 31 (2004) [Google Scholar]
  11. A. Giordano, Clearance space and deviation space. Application to three-dimensional chain of dimensions and positions, in Proc. of the 3rd CIRP Seminars on Computer-Aided Tolerancing, 1993 (1993) [Google Scholar]
  12. G. Saporta, Probabilités, analyses des données et statistiques (Editions TECHNIP, 2006) [Google Scholar]
  13. A. Sergent, Model and optimisation of a machining process thanks to the concept of elementary geometric minimum datum (EGMD), in 14th International CIRP, 2004 (2004) [Google Scholar]
  14. M. Hien Bui, F. Villeneuve, A. Sergent, Manufacturing tolerance analysis based on the model of manufactured part and experimental data, Proc. Inst. Mech. Eng. B: J. Eng. Manuf. 5, 690 (2012) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.