Issue |
Int. J. Metrol. Qual. Eng.
Volume 4, Number 3, 2013
|
|
---|---|---|
Page(s) | 169 - 175 | |
DOI | https://doi.org/10.1051/ijmqe/2013055 | |
Published online | 06 March 2014 |
Multivariate SPC for total inertial tolerancing
1 SYMME Laboratory – Université de
Savoie, 7 chemin de
Bellevue, 74944
Annecy,
France
2 ROBERVAL Laboratory, UMR CNRS 6253,
Université de Technologie de Compiègne, 60200
Compiègne,
France
⋆ Correspondence:
maurice.pillet@univ-savoie.fr
Received:
8
July
2013
Accepted:
16
July
2013
This paper presents a joint use of the T2 chart and total inertial tolerancing for process control. Here, we will show an application of these approaches in the case of the machining of mechanical workpieces using a cutting tool. When a cutting tool in machining impacts different manufactured dimensions of the workpiece, there is a correlation between these parameters when the cutting tool has maladjustment due to bad settings. Thanks to total inertial steering, the correlation structure is known. This paper shows how T2 charts allow one to take this correlation into account when detecting the maladjustment of the cutting tool. Then the total inertial steering approach allows one to calculate the value of tool offsets in order to correct this maladjustment. We will present this approach using a simple theoretical example for ease of explanation.
Key words: Machining / adjustment / T2 / multivariate / inertial tolerancing
© EDP Sciences 2014
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.