Open Access
Int. J. Metrol. Qual. Eng.
Volume 3, Number 2, 2012
Page(s) 67 - 70
Published online 14 November 2012
  1. EN ISO 17025, General requirements for the competence of testing and calibration laboratories, 2005
  2. IEC 60641-2, Pressboard and presspaper for electrical purposes – Part 2 : Methods of tests – 2nd edition, 2004
  3. IEC 60763-2, Specification for laminated pressboard – Part 2 : Methods of test, edition 2.0, 2007
  4. B. Aydemir, S. Fank, C. Vatan, Proficiency technical protocol for tensile and flexural strength, UME-KV-10-03 (TUBITAK UME, 2011)
  5. EN ISO/IEC 17043, Conformity assessment – General requirements for proficiency testing, 2010
  6. B. Aydemir, S. Fank, Malzeme Deneylerinde (Çekme-Eğme) Ölçüm Belirsizliğinin Hesaplanması Eğitim Dokümanı – G2KV-100 (TUBITAK UME, Haziran, 2011)
  7. P704, TÜRKAK Yeterlilik Deneyleri ve Laboratu-varlararası Karşilatşırma Programları Prosedürü, Rev. 3, 26.01.2006
  8. B. Aydemir, S. Fank, Proficiency test report for tensile and flexural strength, UME-KV-11-01 (TUBITAK UME, 2011)

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.