Open Access
Int. J. Metrol. Qual. Eng.
Volume 8, 2017
Article Number 25
Number of page(s) 9
Published online 20 October 2017
  1. IEC GUIDE 115:2007, Application of uncertainty of measurement to conformity assessment activities in the electrotechnical sector (IEC, Switzerland, 2007) [Google Scholar]
  2. ISO/IEC 17025:2005, General requirements for the competence of testing and calibration laboratories (ISO, Switzerland, 2005) [Google Scholar]
  3. ISO/IEC Guide 98-1:2009, Uncertainty of measurement – Part 1: Introduction to the expression of uncertainty in measurement (ISO, Switzerland, 2009) [Google Scholar]
  4. O.M. Vasilevskyi, Calibration method to assess the accuracy of measurement devices using the theory of uncertainty, Int. J. Metrol. Qual. Eng. 5, 403 (2014) [CrossRef] [EDP Sciences] [Google Scholar]
  5. S. Eichstädt, C. Elster, Reliable uncertainty evaluation for ODE parameter estimation − a comparison, J. Phys.: Conf. Ser. 490, 012230 (2014) [CrossRef] [Google Scholar]
  6. O.M. Vasilevskyi, Methods of determining the recalibration interval measurement tools based on the concept of uncertainty, Tekhn. Elektrodin. 6, 81 (2014) [Google Scholar]
  7. C. Elster, S. Eichstädt, A. Link, Uncertainty evaluation of dynamic measurements in line with GUM, in XIX IMEKO World Congress on Fundamental and Applied Metrology (2009) [Google Scholar]
  8. Evaluation of measurement data, Guide to the expression of uncertainty in measurement, JCGM 100, GUM 1995 with minor corrections, 1st edn. (2008) [Google Scholar]
  9. G. Gomah, A traceable time interval measurement with a reduced uncertainty, Int. J. Metrol. Qual. Eng. 6, 301 (2015) [CrossRef] [EDP Sciences] [Google Scholar]
  10. A.B. Forbes, Uncertainty associated with form assessment in coordinate metrology, Int. J. Metrol. Qual. Eng. 4, 17 (2013) [CrossRef] [EDP Sciences] [Google Scholar]
  11. O.M. Vasilevskyi, Metrological characteristics of the torque measurement of electric motors, Int. J. Metrol. Qual. Eng. 8, 7 (2017) [CrossRef] [EDP Sciences] [Google Scholar]
  12. S. Eichstädt, Analysis of Dynamic Measurements – Evaluation of Dynamic Measurement Uncertainty (2012) [Google Scholar]
  13. T.J. Esward, C. Elster, J.P. Hessling, Analysis of dynamic measurements: new challenges require new solutions, in Proc. of XIX IMEKO World Congress on Fundamental and Applied Metrology (2009) [Google Scholar]
  14. O.M. Vasilevskyi, M. Yu. Yakovlev, P.I. Kulakov, Spectral method to evaluate the uncertainty of dynamic measurements, Tekhn. Elektrodin. 4, 72 (2017) [CrossRef] [Google Scholar]
  15. S. Eichstädt, A. Link, C. Elster, Dynamic uncertainty for compensated second-order systems, Sensors 10, 7621 (2010) [CrossRef] [Google Scholar]
  16. S. Eichstädt, C. Elster, I.M. Smith, T.J. Esward, Evaluation of dynamic measurement uncertainty − an open-source software package to bridge theory and practice, J. Sens. Sens. Syst. 6, 97 (2017) [CrossRef] [Google Scholar]
  17. O.M. Vasilevskyi, A frequency method for dynamic uncertainty evaluation of measurement during modes of dynamic operation, Int. J. Metrol. Qual. Eng. 6, 202 (2015) [CrossRef] [EDP Sciences] [PubMed] [Google Scholar]
  18. O.M. Vasilevskyi, Evaluation of uncertainty of the results of dynamic measurements, conditioned the limited properties used the measuring instrument, in 9th International Workshop on Analysis of Dynamic Measurements, Berlin, 2016 (2016),,-Alexsandre-Dynamic-uncertainty.pdf [Google Scholar]
  19. Yu. Gyzhko, М. Myslovych, Elements of the theory and practical application of systems for vibrodiagnostics of electrical machines moving parts, Techn. Electrodyn. 2, 45 (2015) [Google Scholar]
  20. O.M. Vasilevskyi, P.I. Kulakov, V.M. Didych, Technique of research uncertainty dynamic measurements of vibration acceleration of rotating machines, IOSR J. Electr. Electronics Eng. (IOSR-JEEE) 11, 34 (2016), DOI:10.9790/1676-1105033439 [CrossRef] [Google Scholar]
  21. ISO 10816-4:2009, Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating parts – Part 4: Gas turbine sets with fluid-film bearings (ISO, Switzerland, 2009) [Google Scholar]
  22. J.T. Broch, Mechanical Vibrations and Shock Measurements, 2nd edn. (Brüel & Kjær, 1984) [Google Scholar]
  23. O.M. Vasilevskyi, Advanced mathematical model of measuring the starting torque motors, Tekhn. Elektrodin 6, 76 (2013) [Google Scholar]
  24. J. Doscher, Accelerometer Design and Applications Analog Devices (1998) [Google Scholar]
  25. IEC 60747-14-4:2011, Semiconductor devices – Discrete devices – Part 14-4: Semiconductor accelerometers (IEC, Switzerland, 2011) [Google Scholar]
  26. O.M. Vasilevskyi, P.I. Kulakov, I.A. Dudatiev, V.M. Didych, A. Kotyra, B. Suleimenov, A. Assembay, A. Kozbekova, Vibration diagnostic system for evaluation of state interconnected electrical motors mechanical parameters, in Photonics Applications in Astronomy, Communications, Industry, and High Energy Physics Experiments 2017 (2017), Available at: [Google Scholar]
  27. ISO 2954:2012, Mechanical vibration of rotating and reciprocating machinery – requirements for instruments for measuring vibration severity (ISO, Switzerland, 2012) [Google Scholar]
  28. M. Kobusch, S. Eichstädt, A case study in model-based dynamic calibration of small strain gauge force transducers, ACTA IMEKO 6, 3 (2017) [CrossRef] [EDP Sciences] [Google Scholar]
  29. A. Maina, I. Veldman, H. Ploug, NMISA, KEBS, BKSV tri-lateral vibration comparison results, ACTA IMEKO, 5, 69 (2016) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.