Issue |
Int. J. Metrol. Qual. Eng.
Volume 6, Number 2, 2015
|
|
---|---|---|
Article Number | 202 | |
Number of page(s) | 7 | |
DOI | https://doi.org/10.1051/ijmqe/2015008 | |
Published online | 26 August 2015 |
A frequency method for dynamic uncertainty evaluation of measurement during modes of dynamic operation
Department of Metrology and industrial automation,
Vinnytsia National Technical University, 95 Khmelnitskoye Shose, Vinnytsia,
21021
Vinnytsia,
Ukraine
⋆ Correspondence:
o.vasilevskyi@gmail.com
Received:
2
March
2015
Accepted:
30
May
2015
Proposed the frequency of method to assessing the dynamic uncertainty of measurement devices which allows to investigate the accuracy of changes in the dynamic operation conditions in the frequency domain, estimate the amplitude dynamic uncertainty based on frequency characteristic and the spectral function of the input signal. This approach was tested at the evaluation dynamic uncertainty of devices measuring dynamic torque of induction electromotors, whereby it was confirmed correctness theoretical statements. On the basis of the calculations that the relative dynamic uncertainty of device measuring is 5.38% and the measuring range from 0.1 to 8 N m, and in the range measuring of dynamic torque of electromotors from 0.1 to 30 N m its value is 5.33%. The proposed approach to the evaluation of the dynamic uncertainty can be used for measuring instruments that have dynamic elements of any type. First proposed a theoretical approach to the assessment the characteristics dynamic of the uncertainty of measuring instruments, working in dynamic modes of operation that meets international standards for presentation of the characteristics of quality and accuracy of electrical products. Theoretical results are tested when measuring dynamic torque of electromotors, which confirmed the correctness and effectiveness of the proposed frequency method for estimating dynamic uncertainty.
Key words: Dynamic uncertainty of measurement devices / assessment of uncertainties in dynamic mode of operation / quality assurance of dynamic measurements / spectral function / frequency characteristic
© EDP Sciences 2015
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.