EDP Sciences logo
Submit your paper
Search
Menu
All issues Volume 6 / No 1 (2015) Int. J. Metrol. Qual. Eng., 6 1 (2015) 104 References
Open Access
Issue
Int. J. Metrol. Qual. Eng.
Volume 6, Number 1, 2015
Article Number 104
Number of page(s) 9
DOI https://doi.org/10.1051/ijmqe/2015004
Published online 23 February 2015
  1. M.A. Lombardi, Fundamentals of Time and Frequency (NIST Publication, CRC Press, LLC, 2002) [Google Scholar]
  2. D.A. Howe, D.W. Allan, J.A. Barnes, Properties of Signal Sources and Measurement Methods, Proceedings of the 35th Annual Symposium on Frequency Control (1981) [Google Scholar]
  3. J. Jespersen, Introduction to the Time Domain Characterization of Frequency Standards. Proc. 23th Annu. Precise Time and Time Interval (PTTI) Meeting (Pasadena, CA. 83-102, 1991) [Google Scholar]
  4. D.A. Howe, D.W. Allan, J.A. Barnes, Properties of Signal Sources and Measurement Methods, Proceedings of the 35th Annual Symposium on Frequency Control (1981) [Google Scholar]
  5. J. Kalisz, Review of methods for time interval measurements with picosecond resolution, Metrologia 41, 17–32 (2004) [CrossRef] [Google Scholar]
  6. J.T. Stanley, J.B. Milton, Basic Laboratory Methods for Measurement or Comparison of Frequencies and Time Intervals, NBS REPORT, U.S. Department of Commerce, National Bureau of Standards, Institute for Basic Standards, Boulder Colorado, 80302 (1972) [Google Scholar]
  7. M.A. Lombardi, National Institute of Standards and Technology (NIST), Boulder, Colorado, Legal and Technical Measurement Requirements for Time and Frequency, Review Paper, NIST Publication [Google Scholar]
  8. J. Kalisz, Review of methods for time interval measurements with picosecond resolution, Metrologia 41, 17–32 (2004) [CrossRef] [Google Scholar]
  9. Understanding frequency counter specifications, Application Note 200-4, Electronic Counters Series, Hewlett Packard, USA [Google Scholar]
  10. More hints for making better frequency counter measurements, Application Note 1499, Agilent Technologies, USA [Google Scholar]
  11. Fundamentals of the electronic counters, Application Note 200, Electronic Counter Series, Agilent Technologies, USA [Google Scholar]
  12. Application Note, Hints for Getting the Most from Your Frequency Counter, Agilent Technologies [Google Scholar]
  13. SR620 universal time interval counter, user manual, Revision 2.7 (2/2006), Stanford Research Systems [Google Scholar]
  14. G.G. Hamza, Investigation of the Optimum Trigger Level in Time Interval Measurement, MAPAN-Journal of Metrology Society of India (2014) [Google Scholar]
  15. Hewlett-Packard Company, Fundamentals of Time Interval Measurement, Hewlett-Packard Application Note 200-3, 5965-7663E (1997) 68 [Google Scholar]
  16. Sources of error in time interval measurements, Application Note, Fluke Corporation, USA [Google Scholar]
  17. http://www.spectradynamics.com/product-sheets/PPS-2RM-B1_2010.pdf, November 2014 [Google Scholar]
  18. Bureau International des Poids et Mesures, The International System of Units (SI), 8th edn., Organisation Intergouvernementale de la Convention du Me‘tre (2006) [Google Scholar]
  19. G. Hamza, A. Zekry, I. Motawie, Implementation of a complete GPS receiver using simulink, IEEE circuits and systems magazine, Fourth Quarter (2009) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.