Open Access
Issue
Int. J. Metrol. Qual. Eng.
Volume 2, Number 1, 2011
Page(s) 39 - 44
DOI https://doi.org/10.1051/ijmqe/2011007
Published online 29 June 2011
  1. E. Goldschmidt, Gammes et cotation pour le réglage des machines-outils de décolletage, Doctoral thesis, Université de Savoie, France, 2009 [Google Scholar]
  2. O.R. Wade, Tolerance Control in Design and Manufacturing (Industrial Press, New York, 1967) [Google Scholar]
  3. O.R. Wade, Tolerance control, in: Tool and manufacturing engineering handbook, machining (Dearborn, MI, Society of Manufacturing Engineers, 2/1–2/60, 1983), Vol. 1 [Google Scholar]
  4. P. Bourdet, Chaînes de cotes de fabrication (méthode des Delta L) : Première partie, le modèle, L’Ingénieur et Technicien de l’Enseignement Technique 180, 23–32 (1967) [Google Scholar]
  5. P. Bourdet, Chaînes de cotes de fabrication (méthode des Delta L) : Deuxième partie, le mode opératoire, L’Ingénieur et Technicien de l’Enseignement Technique 191, 15–23 (1975) [Google Scholar]
  6. E. Pairel, E. Goldchmidt, P.-A. Adragna, P. Hernandez, M. Pillet, The pilot dimensions method: Reconciling Steering and Conformity in Workshops, International Journal of Production Research, iFirst, 1–14 (2010) [Google Scholar]
  7. D. Duret, M. Pillet, A. Sergent, Cotation de fabrication paramétrée, Modélisation et pilotage d’une production, Proceedings of the 3ème Colloque International Conception et Production Intégrées (CPI’2003) Meknès, Maroc [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.