Issue |
Int. J. Metrol. Qual. Eng.
Volume 3, Number 3, 2012
|
|
---|---|---|
Page(s) | 145 - 150 | |
DOI | https://doi.org/10.1051/ijmqe/2012022 | |
Published online | 13 May 2013 |
Generation of numerical artefacts for geometric form and tolerance assessment
National Physical Laboratory, Teddington, UK
⋆ Correspondence: alistair.forbes@npl.co.uk
Received: 23 October 2012
Accepted: 28 October 2012
This paper describes an approach to generating reference data sets to evaluate the performance of algorithms used in coordinate metrology for form and geometric tolerance assessment. The approach starts with the reference results, e.g., the solution feature parameter values, and then determines the coordinate data. In this way, the expensive development of reference software is avoided. In this paper we consider the generation of reference data associated with determining the best-fit surface according to the least squares (Gaussian) and Chebyshev criteria.
Key words: Data generator / form assessment / numerical artefact / optimality conditions
© EDP Sciences 2013
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.