Comparison of the RAFSI and PIV method in multi-criteria decision making: application to turning processes
Int. J. Metrol. Qual. Eng., 13 (2022) 14
Published online: 2022-10-24
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
113 (2026)
https://doi.org/10.1002/9781394242139.ch4
Optimizing sustainability: information aggregation in smart factories for energy efficiency enhancement
Mohd Anjum, Naoufel Kraiem, Hong Min, Yousef Ibrahim Daradkeh, Ashit Kumar Dutta and Sana ShahabScientific Reports 15 (1) (2025)
https://doi.org/10.1038/s41598-024-83304-8
Comparing Subjective Weighting Methods in Multi-Criteria Decision-Making: An Application to Electric Bicycle Ranking
Nguyen Truong Giang, Hoang Xuan Thinh and Nguyen Truong GiangEngineering, Technology & Applied Science Research 15 (2) 21963 (2025)
https://doi.org/10.48084/etasr.10444
Applying MCDM methods for electric vehicle selection: a comparative study between CRADIS and PIV methods
Duc Do, Nazlı Ersoy, Trong Nguyen and Xuan HoangJournal of Applied Engineering Science 23 (2) 345 (2025)
https://doi.org/10.5937/jaes0-56793
A Contemporary Approach for Solving Selection Problems: The Entropy-Based Performance Measurement Method
Furkan Fahri AltıntaşBlack Sea Journal of Engineering and Science 8 (5) 1373 (2025)
https://doi.org/10.34248/bsengineering.1699472
Multi-Optimization in Turning Process
Bui Thanh Binh and Nguyen Duc HanhInternational Journal of Scientific Research in Science and Technology 12 (1) 628 (2025)
https://doi.org/10.32628/IJSRST25121203
Investigation of the Fatigue Behavior of the Discharge Frame in Electrostatic Precipitators Under Symmetric Cyclic Loading
Cuong Van Nguyen, Dung Tien Nguyen, Tung Anh Nguyen and Got Van HoangJournal of Machine Engineering 25 (4) 134 (2025)
https://doi.org/10.36897/jme/214078
Evaluating the Impact of Weighting Methods on the Stability of Scores for Alternatives in Multi-Criteria Decision-Making Problems
Nguyen Thi Dieu Linh, Nguyen Hong Son and Dang Xuan ThaoEngineering, Technology & Applied Science Research 15 (1) 19998 (2025)
https://doi.org/10.48084/etasr.9518
Applying the RAWEC Method for Material Selection of Crankshafts
Nguyen Hoang Giang and Nguyen Duc ChinhInternational Journal of Scientific Research in Science and Technology 12 (1) 558 (2025)
https://doi.org/10.32628/IJSRST2512147
Assessing the Impact of Criterion Weights on the Ranking of the Top Ten Universities in Vietnam
Duc Trung DoEngineering, Technology & Applied Science Research 14 (4) 14899 (2024)
https://doi.org/10.48084/etasr.7607
An improved RAFSI method based on single-valued trapezoidal neutrosophic number and its Harmonic and Arithmetic mean operators for healthcare service quality evaluation
Irvanizam Irvanizam and Novi ZaharaExpert Systems with Applications 248 123343 (2024)
https://doi.org/10.1016/j.eswa.2024.123343
1 (2024)
https://doi.org/10.1109/INFOTEH60418.2024.10495952
Selection of Crankshaft Manufacturing Material by the PIV Method
Hong Son Nguyen, Tran Trung Hieu, Nguyen Manh Thang, Huynh Nhu Tan, Nguyen Tien Can, Pham Thi Thao and Nguyen Chi BaoEngineering, Technology & Applied Science Research 14 (4) 14848 (2024)
https://doi.org/10.48084/etasr.7514
Multi-Objective Optimization of Turning Process by Fuca Method
Xuan Thinh HoangStrojnícky časopis - Journal of Mechanical Engineering 73 (1) 55 (2023)
https://doi.org/10.2478/scjme-2023-0005
Combining FUCA, CURLI, and Weighting Methods in the Decision-Making of Selecting Technical Products
Anh-Tu NguyenEngineering, Technology & Applied Science Research 13 (4) 11222 (2023)
https://doi.org/10.48084/etasr.6015
Comparison of two methods in multi-criteria decision-making: application in transmission rod material selection
Hoang Xuan Thinh and Nguyen Trong MaiEUREKA: Physics and Engineering (6) 59 (2023)
https://doi.org/10.21303/2461-4262.2023.003046
Grey hybrid normalization with period based entropy weighting and relational analysis for cities rankings
Moses Olabhele Esangbedo and Jieyun WeiScientific Reports 13 (1) (2023)
https://doi.org/10.1038/s41598-023-40954-4
3D Printer Selection for the Sustainable Manufacturing Industry Using an Integrated Decision-Making Model Based on Dombi Operators in the Fermatean Fuzzy Environment
Ömer Faruk Görçün, Sarfaraz Hashemkhani Zolfani, Hande Küçükönder, Jurgita Antucheviciene and Miroslavas PavlovskisMachines 12 (1) 5 (2023)
https://doi.org/10.3390/machines12010005
Dijital Pazarlama Teknolojilerinin PIV ve CODAS Yöntemleri ile Analizi
Murat Kemal KELEŞ and Duygu ALACAMehmet Akif Ersoy Üniversitesi Uygulamalı Bilimler Dergisi 7 (1) 84 (2023)
https://doi.org/10.31200/makuubd.1254624
Expanding the Data Normalization Strategy to the MACONT Method for Multi-Criteria Decision Making
Anh-Tu NguyenEngineering, Technology & Applied Science Research 13 (2) 10489 (2023)
https://doi.org/10.48084/etasr.5672
Disaster readiness assessment model using integrated statistical variance and proximity value index
Agung Sutrisno, Cynthia Erlita Virgin Wuisang and Ade YusupaInternational Journal of Emergency Services 12 (2) 197 (2023)
https://doi.org/10.1108/IJES-09-2022-0050