The Citing articles tool gives a list of articles citing the current article. The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Effects of wall temperature on non-premixed micro-combustion: A comparative experimental study of copper and aluminum in Swiss-roll chambers
Soroush Sarrafan Sadeghi, Sadegh Tabejamaat, Amirreza Ghahremani and Sina Narimani Asl Fuel Processing Technology 274 108237 (2025) https://doi.org/10.1016/j.fuproc.2025.108237
A Review of Methods for Assessing the Quality of Measurement Systems and Results
Andrej Razumić, Biserka Runje, Vesna Alar, Branko Štrbac and Zvonko Trzun Applied Sciences 15(17) 9393 (2025) https://doi.org/10.3390/app15179393
Influence of Vibration-Assisted Dynamic Solidification on Microstructure and Mechanical Properties of Permanent Mold Cast Aluminum Alloy 2024 with Conformal Cooling
Muhammad Waqas Ali Khan, Rauf Ahmad, Syed Masood Arif Bukhari, Muhammad Sultan, Naveed Husnain, Muhammad Tuoqeer Anwar, Umer Bin Nooman, Hassan Raza, Abid Latif, Sajjad Ahmad and Khurram Hasnain Bukhari Journal of Manufacturing and Materials Processing 9(12) 416 (2025) https://doi.org/10.3390/jmmp9120416
Methodology for analyzing the propagation of uncertainty in the mechanical properties of rectangular cross-section specimens under three-point bending tests
Jessé Valente de Liz, Milton Domingos Michél, Rafael Machado Casali, Gary B. Hughes, Francisco Carlos Serbena, Breno Salgado Barra and Alexandre Mikowski Construction and Building Materials 471 140608 (2025) https://doi.org/10.1016/j.conbuildmat.2025.140608
New method for assessing the repeatability of the measuring system for roughness measurements
Carsten Engler, Anthimos Georgiadis, Dirk Lange and Nicolas Meier International Journal of Metrology and Quality Engineering 15 10 (2024) https://doi.org/10.1051/ijmqe/2024008
Confocal controlled laser-induced breakdown spectroscopy for quantitative detection of cadmium in soil
Angze Li, Xiaojuan Chuai, Yuxin Liu, Lirong Qiu, Han Cui and Weiqian Zhao Spectrochimica Acta Part B: Atomic Spectroscopy 216 106931 (2024) https://doi.org/10.1016/j.sab.2024.106931
Addressing Uncertainty on Machine Learning Models for Long-Period Fiber Grating Signal Conditioning Using Monte Carlo Method
UNCERTAINTY EVALUATION USING LAW OF PROPAGATION AND MONTE CARLO SIMULATION METHODS WITH THE AUTORFPOWER MEASUREMENT SOFTWARE
Erkan Danacı, Aliye Kartal Doğan, Engin Can Çiçek, Anıl Çetinkaya, Muhammed Çağrı Kaya, M. S. Halit Oğuztüzün and Gülsün Tünay Konya Journal of Engineering Sciences 12(3) 596 (2024) https://doi.org/10.36306/konjes.1364464
A novel swiss-roll counterflow micro-combustor: Experimental investigation of methane-oxygen flame behavior over time
Optimization of the Monte Carlo Simulation to Improve the Calibration Uncertainty of Volume Meters for Hydrocarbons Custody Transfer
Agustín García-Berrocal, Cristina Montalvo, Pablo Carmona and Raúl García-Álvarez Applied Sciences 14(24) 11472 (2024) https://doi.org/10.3390/app142411472
A novel Swiss-roll counterflow micro-combustor: Experimental investigation of flame dynamic characteristics by spectroscopy and RGB image processing methods
Experimental Validation Through a Parallel Computation Algorithm for Evaluation Uncertainty of the Mathematical Model of Direct Expansion Solar Assisted Heat Pump
Willian M. Duarte, Tiago F. Paulino, Wendel M. Duarte, Antônio A.T. Maia and Luiz Machado Journal of Solar Energy Research Updates 10 8 (2023) https://doi.org/10.31875/2410-2199.2023.10.2
Load Profile Analysis in Electrical Systems: The Impact of Electrical Signature and Monitoring Quality in the Energy Digitalization Process
Uncertainty analysis of two-dimensional self-calibration with hybrid position using the GUM and MCM methods
Xiaoyue Qiao, Chengjie Fan, Xin Chen, Guoqing Ding, Ping Cai and Li Shao Measurement Science and Technology 32(12) 125012 (2021) https://doi.org/10.1088/1361-6501/ac2552
SAE 4340 Fracture Toughness Evaluation Following Wang’s Formulation for Spiral Notch Torsion Test Specimens
Guilherme Bernardes Rodrigues, Marcelo Torres Piza Paes, Francisco Francelino Ramos Neto, Sinésio Domingues Franco, Rosenda Valdés Arencibia and Waldek Wladimir Bose Filho Journal of Testing and Evaluation 49(5) 3734 (2021) https://doi.org/10.1520/JTE20200417
Modelling bark volume for six commercially important tree species in France: assessment of models and application at regional scale
Rodolphe Bauer, Antoine Billard, Frédéric Mothe, Fleur Longuetaud, Mojtaba Houballah, Alain Bouvet, Henri Cuny, Antoine Colin and Francis Colin Annals of Forest Science 78(4) (2021) https://doi.org/10.1007/s13595-021-01096-7
Uncertainty Estimation for the Liquid Hydrocarbons Measurement in Static and Dynamic Measurement Systems: A Colombian Case Study
Proposed approach for force transducers classification
Gouda M. Mahmoud, Seif M. Osman and Riham S. Hegazy International Journal of Metrology and Quality Engineering 12 3 (2021) https://doi.org/10.1051/ijmqe/2021001
A Monte Carlo simulation investigation on the effect of the probability distribution of input quantities on the effective area of a pressure balance and its uncertainty
José Eduardo Silveira Leal, Joyce Antunes da Silva and Rosenda Valdés Arencibia Journal of the Brazilian Society of Mechanical Sciences and Engineering 42(9) (2020) https://doi.org/10.1007/s40430-020-02548-3
Monte Carlo Simulation in Uncertainty Evaluation: Strategy, Implications and Future Prospects