Evaluation of measurement uncertainty for the determination of the mechanical resistance of the brick samples by using uniaxial compressive strength test
Int. J. Metrol. Qual. Eng., 9 (2018) 12
Published online: 2018-11-16
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Resistência à compressão de argamassas cimentícias com adição de lodo de estação de tratamento de água: avaliação da incerteza padrão por meio da LPU (Law of Propagation of Uncertainties)
Thiago Francisco de Souza, Maicon Santos Sousa, Ruan Carlos de Araújo Moura, Danilo de Santana Nunes, Franco Dani Rico Amado, José Renato de Castro Pessoa and Ricardo de Araújo KalidCaderno Pedagógico 22 (7) e16756 (2025)
https://doi.org/10.54033/cadpedv22n7-348
39 253 (2024)
https://doi.org/10.1007/978-981-99-8807-5_21
A novel method of experimental determination of grain stresses and critical resolved shear stresses for slip and twin systems in a magnesium alloy
P. Kot, M. Wroński, A. Baczmański, A. Ludwik, S. Wroński, K. Wierzbanowski, Ch. Scheffzük, J. Pilch and G. FarkasMeasurement 221 113469 (2023)
https://doi.org/10.1016/j.measurement.2023.113469
Study of the strengthened state near the forces for the semi-plan
Drakuli Lumi, Anis Sulejmani, Klodian Dhoska and Odhise KoçaPollack Periodica 17 (2) 98 (2022)
https://doi.org/10.1556/606.2021.00482
Measurement uncertainty for mechanical resistance of manufactured steel bar
Klodian Dhoska, Drakuli Lumi, Anis Sulejmani and Odhise KoçaPollack Periodica (2022)
https://doi.org/10.1556/606.2022.00532
Analysis of recycled tire rubber modified bitumen in Albania for quality of the road construction
K Dhoska, I Markja and A PramonoIOP Conference Series: Materials Science and Engineering 673 (1) 012126 (2019)
https://doi.org/10.1088/1757-899X/673/1/012126