Open Access
| Issue |
Int. J. Metrol. Qual. Eng.
Volume 15, 2024
|
|
|---|---|---|
| Article Number | 21 | |
| Number of page(s) | 14 | |
| DOI | https://doi.org/10.1051/ijmqe/2024016 | |
| Published online | 04 October 2024 | |
- ISO/TS 15 530-4: 2008 Geometrical Product Specifications (GPS) − Coordinate measuring machines (CMM) − Technique for determining the uncertainty of measurement − Part 4: Evaluating task-specific measurement uncertainty using simulation. [Google Scholar]
- D. Heisselmann, M. Franke, K. Rost, K. Wendt, T. Kistner, C. Schwehn, Determination of measurement uncertainty by Monte-Carlo simulation, WSPC Proceedings 361–371 (2019) [Google Scholar]
- N. Van Gestel, Determining measurement uncertainties of feature measurements on CMMs, Thesis, Leuven (2011) [Google Scholar]
- P. Salacheep, Error compensation and uncertainty evaluation of CMMs based on kinematic error models and Gaussian processes, Thesis, London (2016) [Google Scholar]
- S. Hammad Mian, A. Al-Ahmari, New developments in coordinate measuring machines for manufacturing industries, Int. J. Metrol. Qual. Eng. 5, 101 (2014) [CrossRef] [EDP Sciences] [Google Scholar]
- Gaska, W. Harmatys, P. Gąska, M. Gruza, K. Gromczak, K. Ostrowska, Virtual CMM-based model for uncertainty estimation of coordinate measurements performed in industrial conditions, Measurement 98, 361–371 (2017) [CrossRef] [Google Scholar]
- Charki, K. Diop, S. Champmartin, A. Ambari, Numerical simulation and experimental study of thrust air bearings with multiple orifices, Int. J. Mech. Sci. 72, 28–38 (2013) [CrossRef] [Google Scholar]
- T. Coorevits, Contribution au développement de techniques d'autocalibrage appliquées aux machines à mesurer tridimensionnelles, Thesis, Lille (1990) [Google Scholar]
- J.-F. Manlay, Fast checking of CMM geometry with a patented tool, in 17th International congress of metrology, Paris, Proceedings (2015) [Google Scholar]
- ISO/ TS 2316 5: 2006, Geometrical Product Specifications (GPS) − Coordinate measuring machines (CMM) test uncertainty [Google Scholar]
- J. Berthold, D. Imkamp, Looking at the future of manufacturing metrology: roadmap document of the German VDI/VDE Society for measurement and automatic control, J. Sens. Sensor Syst. (2013) [Google Scholar]
- E-41-36110-N, Moyens de production − Agrément capabilité des moyens de mesure − CNOMO [Google Scholar]
- NF EN ISO 1101 April 2017, Geometrical Product Specifications (GPS) − Geometrical tolerancing − Tolerances of form, orientation, location and run-out [Google Scholar]
- NF EN ISO 10360-2, January 2010, Geometrical Product Specifications (GPS) − Acceptance and reverification tests for coordinate measuring machines (CMM) − Part 2: CMMs used for measuring linear dimensions [Google Scholar]
- J.-F. Manlay, CMM: why doing a new intercomparison? in 13th International Congress of Metrology, Lille, Proceedings (2007) [Google Scholar]
- J.-F. Manlay, Une approche pratique des incertitudes de mesure en 3D, AFNOR éditions, BIVI I-80-22 (2011) [Google Scholar]
- NF EN ISO 5459, November 2011, Geometrical Product Specifications (GPS) − Geometrical tolerancing − Datums and datums systems [Google Scholar]
- G. Theveneau, M. Cadignan, G. Lanier, Incertitudes de mesure sur une machine à mesurer tridimensionnelle, revue Chocs Focus 8, 22–23 (2023) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.