Int. J. Metrol. Qual. Eng.
Volume 14, 2023
Topical Issue - Advances in Metrology and Quality Engineering
Article Number 1
Number of page(s) 11
Published online 22 February 2023
  1. K. Ohashi, K. Tan, T. Ashida, S. Tsukamoto, Quick on-machine measurement of ground surface finish available for mass production cylindrical grinding processes, Int. J. Autom. Technol. 9, 176–183 (2015) [CrossRef] [Google Scholar]
  2. T. Liu, Z. Deng, L. Lv, S. She, W. Liu, C. Luo, Experimental analysis of process parameter effects on vibrations in the high-speed grinding of a camshaft, Strojniski Vestnik/J. Mech. Eng. 66, (2020) [Google Scholar]
  3. J. Kopac, P. Krajnik, J.M. d'Aniceto, Grinding analysis based on the matrix experiment, 13th International scientific conference on achievements in mechanical and materials engineering (2005) pp. 332–334 [Google Scholar]
  4. P. Krajnik, A. Sluga, J. Kopac, Radial basis function simulation and metamodelling of surface roughness in centreless grinding, J. Achiev. Mater. Manufactur. Eng. 14, 104–110 (2006) [Google Scholar]
  5. A.N. Siddiquee, Z.A. Khan, Z. Mallick, Grey relational analysis coupled with principal component analysis for optimisation design of the process parameters in in-feed centreless cylindrical grinding, Int. J. Adv. Manufactur. Technol. 46, 983–992 (2010) [CrossRef] [Google Scholar]
  6. N.C. Hong-Phong, Investigation of influence of cutting temperature on machining surface quality when machining the SKD61 steel by using segmented grinding wheel, Master thesis, Hanoi University of Science and Technology, Vietnam (2016) [Google Scholar]
  7. S. Periyasamy, M. Aravin, D. Vivek, K.S. Amirthagadeswaran, Optimization of surface grinding process parameters for minimum surface roughness in AISI 1080 using response surface methodology, Adv. Mater. Res. 984, 118–123 (2014) [CrossRef] [Google Scholar]
  8. B. Dasthagiri, E.V. Goud, Optimization studies on surface grinding process parameters, Int. J. Innov. Res. Sci. Eng. Technol. 4, 6148–6156 (2015) [Google Scholar]
  9. C. Thiagarajan, S. Ranganathan, P. Shanka, Cylindrical grinding process parameters optimization of Al/SiC metal matrix composites, Int. J. Sci. Eng. Res. 6, 738–743 (2015) [Google Scholar]
  10. T. Bhavsar, A.M. Nikalje, Optimization of cylindrical grinding process parameters for EN353 steel using Taguchi technique, Int. J. Res. Appl. Sci. Eng. Technol. 8, 225–231 (2020) [CrossRef] [Google Scholar]
  11. S. Singla, D.K. Dev, Optimization of cylindrical grinding process parameters for heat treated AISI 4150 steel, Int. J. Theor. Appl. Res. Mech. Eng. 7, 5–10 (2018) [Google Scholar]
  12. N. Kumar, H. Tripathi, S. Gandotra, Optimization of cylindrical grinding process parameters on C40E steel using Taguchi technique, Int. J. Eng. Res. Appl. 5, 100–104 (2015) [Google Scholar]
  13. R.K. Panthangi, V. Naduvinamani, Optimization of surface roughness in cylindrical grinding process, Int. J. Appl. Eng. Res. 12, 7350–7354 (2017) [Google Scholar]
  14. L.P. George, K.V. Job, I.M. Chandran, Study on surface roughness and its prediction in cylindrical grinding process based on Taguchi method of optimization, Int. J. Sci. Res. Public. 3, 1–5 (2013) [Google Scholar]
  15. K.N. Ahmed, A.S. Aher, A review on optimization of process parameter in cylindrical grinding of austenitic stainless steel rod (AISI 316 L) by Taguchi method, Mukt Shabd J. 9, 2346–2352 (2020) [Google Scholar]
  16. G. Liu, W. Wei, X. Dong, C. Rui, P. Liu, H. Li, Relief grinding of planar double-enveloping worm gear hob using a four-axis CNC grinding machine, Int. J. Adv. Manufactur. Technol. 89, 3631–3640 (2017) [CrossRef] [Google Scholar]
  17. И. И. Cеменченко, B. M. Maтюшин, Г. Н. Сахаров, Проектирование, металлорежущих инструментов, (1962), (Russian) I. I. Semenchenko, V. M. Matyushin, and G. N. Sakharov, Design of Metal Cutting Tools, Machine, (1962). [Google Scholar]
  18. R.K. Roy, A Primer on the Taguchi Method (Society of Manufacturing Engineers, 2010) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.