Open Access
Issue
Int. J. Metrol. Qual. Eng.
Volume 5, Number 2, 2014
Article Number 204
Number of page(s) 13
DOI https://doi.org/10.1051/ijmqe/2014009
Published online 09 October 2014
  1. P. Schellekens, N. Rosielle, H. Vermeulen, M. Vermeulen, S. Wetzels, W. Pril, Design for precision: current status and trends, Ann. CIRP 47, 557–586 (1998) [CrossRef] [Google Scholar]
  2. T.A.M. Ruijl, Ultra Precision Coordinate Measuring Machine – Design, Calibration and Error Compensation, Ph.D. Thesis, Technische Universiteit Delft, 2001, ISBN 90-6464-287-7 [Google Scholar]
  3. K. Becker, E. Heynacher, M400 – A coordinate measuring machine with 10 nm resolution, Proc. SPIE 802, 209–216 (1987) [CrossRef] [Google Scholar]
  4. A. Weckenmann, G. Peggs, J. Hoffmann, Probing systems for dimensional micro- and nano-metrology, Meas. Sci. Technol. 17, 504–509 (2006) [CrossRef] [Google Scholar]
  5. I. Widdershoven, R.L. Donker, H.A.M. Spaan, Realization and calibration of the “Isara 400” ultra-precision CMM, J. Phys.: Conf. Ser. 311, 012002 (2011) [CrossRef] [Google Scholar]
  6. E. Abbe, Meßapparate für Physiker, Zeitschrift Fur Instrumentenkunde 10, 446–448 (1890) [Google Scholar]
  7. A. Vissiere, H. Nouira, M. Damak, O. Gibaru, J.M. David, Concept and architecture of a new apparatus for cylindrical form measurement with a nanometre level of accuracy, Meas. Sci. Technol. 23, 094014 (2012) [CrossRef] [Google Scholar]
  8. H. Nouira, J.A. Salgado, N. El-Hayek, S. Ducourtieux, A. Delvallée, N. Anwer, Setup of a high-precision profilometer and comparison of tactile and optical measurements of standards, Meas. Sci. Technol. 25, 12 (2014) [Google Scholar]
  9. H. Nouira, N. El-Hayek, X. Yuan, N. Anwer, Characterization of the main error sources of chromatic confocal probes for dimensional measurement, Meas. Sci. Technol. 25, 14 (2014) [Google Scholar]
  10. R. Leach, Optical Measurement of Surface Topography (Handbook, Spring, 2011) [Google Scholar]
  11. M. Vermeulen, High-Precision 3D-Coordinate Measuring Machine; Design and Prototype-Development, Ph.D. thesis, Technical University of Eindhoven, 1999 [Google Scholar]
  12. M.G.A. Van Veghel, R.H. Bergmans, H.J. Nieuwenkamp, Traceability of a linescale based micro-CMM, Proceedings of the Euspen international conference 2008 (Zurich, Switzerland, 2008), pp. 18–22 [Google Scholar]
  13. A.I. Mares, R.H. Bergmans, Evaluation of an optical coordinate measuring machine for measuring grated structures, Meas. Sci. Technol. 23, 094012 (2012) [CrossRef] [Google Scholar]
  14. Internal report VSL “Probing behavior of the VSL F25 microCMM”, 2013 [Google Scholar]
  15. R.H. Bergmans, H.J. Nieuwenkamp, M.G.A. Van Veghel, Probing behaviour of a microCMM, Proceedings of the EUSPEN International conference (Como, Italy, 2012) [Google Scholar]
  16. A. Küng, F. Meli, R. Thalmann, Ultraprecision micro-CMM using a low force 3D touch probe, Meas. Sci. Technol. 18, 319–327 (2007) [CrossRef] [Google Scholar]
  17. A. Küng, F. Meli, Versatile probes for the METAS 3D Micro-CMM, 8th Euspen Int. Conf., Zürich, Switzerland (2008), Vol. 2, pp. 338–342 [Google Scholar]
  18. A. Küng, F. Meli, Self calibration method for 3D roughness of spheres using an ultraprecision coordinate measuring machine, Proc. 5th Euspen Int. Conf., Montpellier, France (2005), Vol. 1, pp. 193–196 [Google Scholar]
  19. F. Meli, A. Küng, Scanning performances with an ultra-precision μ-CMM, Proc. 6th Euspen Int. Conf., Baden bei Wien, Austria (2006), Vol. 1, pp. 193–196 [Google Scholar]
  20. R. Henselmans, L.A. Cacace, G.F.Y. Kramer, P.C.J.N. Rosielle, M. Steinbuch, The NANOMEFOS non-contact measurement machine for freeform optics, Precis. Eng. 35, 607–624 (2011) [CrossRef] [Google Scholar]
  21. R. Henselmans, Non-contact Measurement Machine for Freeform Optics, Ph.D. Thesis, Eindhoven University of Technology, 2009 [Google Scholar]
  22. L.A. Cacace, Development of a nanometre accuracy non-contact probe for NANOMEFOS, MSc Thesis, Technische Universiteit Eindhoven, nr. DCT 2006.032, 2006 [Google Scholar]
  23. R.L. Donker, I. Widdershoven, D. Brouns, H.A.M. Spaan, Realization of Isara 400: a large measurement volume ultra-precision CMM, Proc. ASPE annual meeting (2009) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.