Surface roughness prediction of FFF-fabricated workpieces by artificial neural network and Box–Behnken method
Int. J. Metrol. Qual. Eng., 12 (2021) 17
Published online: 2021-07-14
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Ultra- and high-performance polymers for material extrusion additive manufacturing: Recent advancements, challenges, and optimization perspectives
Nectarios Vidakis, Markos Petousis, Maria Spyridaki, Nikolaos Mountakis, Evgenia Dimitriou and Nikolaos MichailidisMaterials Science and Engineering: R: Reports 167 101086 (2026)
https://doi.org/10.1016/j.mser.2025.101086
Optimization window of printing parameters for specific strength and energy consumption in PEEK additive manufacturing
John Kechagias and Stephanos ZaoutsosMaterials and Manufacturing Processes 41 (2) 229 (2026)
https://doi.org/10.1080/10426914.2026.2613641
Optimization of key quality metrics of high-performance polyvinylidene fluoride (PVDF) in MEX additive manufacturing: correlation with mechanical scores
Markos Petousis, Constantine David, Dimitris Sagris, Emmanuel Stratakis, Maria Spyridaki, Aikaterini Gkagkanatsiou, Ioannis Valsamos and Nectarios VidakisThe International Journal of Advanced Manufacturing Technology (2026)
https://doi.org/10.1007/s00170-026-18645-x
Combined surface treatment and graphene coating strategies for enhanced performance of 3D printed ABS components
Daniel Salvi, Daniele Almonti and Silvia VescoAdvances in Manufacturing (2026)
https://doi.org/10.1007/s40436-025-00589-2
Predicting the mechanical behavior in FDM printing of biopolymers through boosting artificial neural networks
M. Laurenti, I. Bavasso, E. Palazzi, J. Tirillò, F. Sarasini and F. BertoMaterials & Design 257 114475 (2025)
https://doi.org/10.1016/j.matdes.2025.114475
Prediction and compensation of geometric deformation in federated additive manufacturing environments
Benjamin StandfieldManufacturing Letters 44 1507 (2025)
https://doi.org/10.1016/j.mfglet.2025.06.170
A comparative study of artificial neural network with pattern search algorithm and response surface methodology for multi-objective optimization of dimensional accuracy and mechanical properties in PLA-based fused filament fabrication
Valentina Vendittoli, Wilma Polini and Michael S. J. WalterProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture (2025)
https://doi.org/10.1177/09544054251395156
Minimum Surface Roughness Prediction of Grinding SKD11 Steel with the Response Surface Methodology
Van-Long Trinh, Ngoc-Tan Tran and Duy-Trinh NguyenEngineering, Technology & Applied Science Research 15 (2) 21469 (2025)
https://doi.org/10.48084/etasr.10117
Effect of Speed, Acceleration, and Jerk on Surface Roughness of FDM-Fabricated Parts
Krishna Yadav, Shivam Rohilla, Arshad Ali, Mohit Yadav and Deepak ChhabraJournal of Materials Engineering and Performance 33 (14) 6998 (2024)
https://doi.org/10.1007/s11665-023-08476-2
Prediction surface roughness of 3D printed parts using genetic algorithm optimized hybrid learning model
Gazi Akgun and Osman UlkirJournal of Thermoplastic Composite Materials 37 (7) 2225 (2024)
https://doi.org/10.1177/08927057241243364
Study of the industrial potential of Markforged X7 3D printer
Daouda Nikiema, Alain Sergent and Pascale BallandMechanics & Industry 25 4 (2024)
https://doi.org/10.1051/meca/2024003
Improvement of tensile strength of fused deposition modelling (FDM) part using artificial neural network and genetic algorithm techniques
V. Chowdary Boppana and Fahraz AliInternational Journal of Industrial Engineering and Operations Management 6 (2) 117 (2024)
https://doi.org/10.1108/IJIEOM-01-2023-0006
Modeling and Prediction of Surface Roughness in Hybrid Manufacturing–Milling after FDM Using Artificial Neural Networks
Strahinja Djurović, Dragan Lazarević, Bogdan Ćirković, Milan Mišić, Milan Ivković, Bojan Stojčetović, Martina Petković and Aleksandar AšonjaApplied Sciences 14 (14) 5980 (2024)
https://doi.org/10.3390/app14145980
Surface roughness assessment of ABS and PLA filament 3D printing parts: structural parameters experimentation and semi-empirical modelling
John D. KechagiasThe International Journal of Advanced Manufacturing Technology 134 (3-4) 1935 (2024)
https://doi.org/10.1007/s00170-024-14232-0
An investigation of the effects of ironing parameters on the surface and compression properties of material extrusion components utilizing a hybrid-modeling experimental approach
John D. Kechagias and Stephanos P. ZaoutsosProgress in Additive Manufacturing 9 (6) 1683 (2024)
https://doi.org/10.1007/s40964-023-00536-2
Box-Behnken modeling to quantify the impact of control parameters on the energy and tensile efficiency of PEEK in MEX 3D-printing
Nectarios Vidakis, Markos Petousis, Nikolaos Mountakis and Emmanuel KarapidakisHeliyon 9 (7) e18363 (2023)
https://doi.org/10.1016/j.heliyon.2023.e18363
Prediction of surface roughness for fused deposition in fabricated work pieces by RSM and ANN technique
V. Naga Malleswari, G. Kameswara Manaswy and P.G. PragvamsaMaterials Today: Proceedings (2023)
https://doi.org/10.1016/j.matpr.2023.03.378
75 (2023)
https://doi.org/10.1109/ICMAE59650.2023.10424531
Application of Artificial Intelligence for Surface Roughness Prediction of Additively Manufactured Components
Temesgen Batu, Hirpa G. Lemu and Hailu ShimelsMaterials 16 (18) 6266 (2023)
https://doi.org/10.3390/ma16186266
Toward data-driven research: preliminary study to predict surface roughness in material extrusion using previously published data with machine learning
Fátima García-Martínez, Diego Carou, Francisco de Arriba-Pérez and Silvia García-MéndezRapid Prototyping Journal 29 (8) 1640 (2023)
https://doi.org/10.1108/RPJ-01-2023-0028
Machine Learning-Based Investigation of the 3D Printer Cooling Effect on Print Quality in Fused Filament Fabrication: A Cybersecurity Perspective
Haijun Si, Zhicheng Zhang, Orkhan Huseynov, Ismail Fidan, Syed Rafay Hasan and Mohamed MahmoudInventions 8 (1) 24 (2023)
https://doi.org/10.3390/inventions8010024
An experimental study on the role of manufacturing parameters on the dry sliding wear performance of additively manufactured PETG
Berkay Ergene and Çağın BolatInternational Polymer Processing 37 (3) 255 (2022)
https://doi.org/10.1515/ipp-2022-0015
Development of artificial intelligence‐based neural network prediction model for responses of additive manufactured polylactic acid parts
Jatinder Singh, Kapil Kumar Goyal, Rakesh Kumar and Vishal GuptaPolymer Composites 43 (8) 5623 (2022)
https://doi.org/10.1002/pc.26876
Parametric optimization of material extrusion 3D printing process: an assessment of Box-Behnken vs. full-factorial experimental approach
John D. Kechagias and Nectarios VidakisThe International Journal of Advanced Manufacturing Technology 121 (5-6) 3163 (2022)
https://doi.org/10.1007/s00170-022-09532-2
Experimental investigation and ANN prediction for part quality improvement of fused deposition modeling parts
A D Tura, H B Mamo, Y D Jelila and H G LemuIOP Conference Series: Materials Science and Engineering 1201 (1) 012031 (2021)
https://doi.org/10.1088/1757-899X/1201/1/012031