Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Optimization of fused filament fabrication system by response surface method

Karin Kandananond

Int. J. Metrol. Qual. Eng., 11 (2020) 4

Published online: 2020-03-20

DOI: https://doi.org/10.1051/ijmqe/2020002

This article has been cited by the following article(s):

Application of Artificial Intelligence for Surface Roughness Prediction of Additively Manufactured Components

Temesgen Batu, Hirpa G. Lemu and Hailu Shimels
Materials 16 (18) 6266 (2023)
DOI: 10.3390/ma16186266
See this article

Integrating 3D printing of polymer matrix composites and metal additive layer manufacturing: surface metallization of 3D printed composite panels through cold spray deposition of aluminium particles

Alessia Serena Perna, Antonio Viscusi, Roberta Della Gatta and Antonello Astarita
International Journal of Material Forming 15 (2) (2022)
DOI: 10.1007/s12289-022-01665-9
See this article

Applications of Artificial Intelligence in Additive Manufacturing

Mohamed Hamoud Ahmed, Azza fathallah Barakat and Abuubakr Ibrahim Abdelwahab
Advances in Computational Intelligence and Robotics, Applications of Artificial Intelligence in Additive Manufacturing 50 (2022)
DOI: 10.4018/978-1-7998-8516-0.ch003
See this article

A study on additive manufacturing build parameters as bonded joint design factors

L. Bergonzi, A. Pirondi, F. Moroni, M. Frascio and M. Avalle
The Journal of Adhesion 1 (2021)
DOI: 10.1080/00218464.2020.1862655
See this article

Studies on 3D Printability of Novel Impact Modified Nylon 6: Experimental Investigations and Performance Evaluation

Gareth Chapman, Akhilesh K. Pal, Manjusri Misra and Amar K. Mohanty
Macromolecular Materials and Engineering 306 (2) (2021)
DOI: 10.1002/mame.202000548
See this article

Performance Analysis of Hydraulic Machines Using Impellers Made from Conventional Steel and 3D Printing Co-polymer

D Sitte and H Sutanto
IOP Conference Series: Materials Science and Engineering 1115 (1) 012049 (2021)
DOI: 10.1088/1757-899X/1115/1/012049
See this article

Surface roughness prediction of FFF-fabricated workpieces by artificial neural network and Box–Behnken method

Karin Kandananond
International Journal of Metrology and Quality Engineering 12 17 (2021)
DOI: 10.1051/ijmqe/2021014
See this article

Experimental analysis on density, micro-hardness, surface roughness and processing time of Acrylonitrile Butadiene Styrene (ABS) through Fused Deposition Modeling (FDM) using Box Behnken Design (BBD)

Raj Mohan R, Venkatraman R and Raghuraman S
Materials Today Communications 27 102353 (2021)
DOI: 10.1016/j.mtcomm.2021.102353
See this article