New developments in coordinate measuring machines for manufacturing industries
Int. J. Metrol. Qual. Eng., 5 1 (2014) 101
Published online: 2014-09-22
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Review of system modeling and calibration technologies for specular/diffuse composite surface metrology
Yanling Li, Feng Gao, Yongjia Xu, Matthew Hill, Yubo Ni, Nan Gao, Zhaozong Meng, Zonghua Zhang and Xiangqian JiangOptics and Lasers in Engineering 201 109662 (2026)
https://doi.org/10.1016/j.optlaseng.2026.109662
Zone-Wise Uncertainty Propagation and Dimensional Stability Assessment in CNC-Turned Components Using Manual and Automated Metrology Systems
Mohammad S. Alsoufi, Saleh A. Bawazeer, Mohammed W. Alhazmi, Hani Alhazmi and Hasan H. HijjiMachines 13 (7) 585 (2025)
https://doi.org/10.3390/machines13070585
Advances in full-space frequency topography measurement of large free-form precision devices
Kaixuan Wang, Jialin Shi, Peng Yu, Yang Yang, Jian Sun, Chanmin Su and Lianqing LiuSurface Topography: Metrology and Properties 13 (3) 033002 (2025)
https://doi.org/10.1088/2051-672X/ade699
Review of principles and research progress of precision measurement methods based on wavefront interference imaging
Liang Yu, Zhiwei Wang, Xionglei Lin, Pengcheng Hu, Haijin Fu, Gabor Molnar and Christian WernerMeasurement Science and Technology 36 (12) 122001 (2025)
https://doi.org/10.1088/1361-6501/ae2498
Error correction in Floyd-Steinberg binary fringe patterns based on bidirectional phase fusion and kernel optimization
Jingmei Sun, Yuchong Chen and Feipeng DaOptics & Laser Technology 192 113674 (2025)
https://doi.org/10.1016/j.optlastec.2025.113674
Comparison of Point Measurement Strategies and Mathematical Algorithms for Evaluation in Contact Measurement of a Spherical Surface on a CMM
Ján Buša, Miroslav Dovica and Teodor TóthApplied Sciences 15 (23) 12392 (2025)
https://doi.org/10.3390/app152312392
Theoretical analysis and simulation verification for measuring the geometric distances between the silicon spheres with the laser interferometer in G measurement
Tong Huang, Rui-Qi Liu, Rui-Jie Li, Ling-Ling Yang, Yan-Jie Zhang, Qiang-Bing Mao and Qing LiClassical and Quantum Gravity 42 (5) 055020 (2025)
https://doi.org/10.1088/1361-6382/adb2d6
9 (2025)
https://doi.org/10.1007/978-3-031-91794-3_2
THE IMPACT OF POINT SAMPLING STRATEGIES ON ACCURACY OF COORDINATE MEASUREMENTS OF FLATNESS DEVIATION
S. Kamenev and K. MarusichBulletin of Belgorod State Technological University named after. V. G. Shukhov 10 (2) 106 (2024)
https://doi.org/10.34031/2071-7318-2024-10-2-106-116
537 (2024)
https://doi.org/10.1109/MetroAeroSpace61015.2024.10591540
A virtual CMM to estimate uncertainties
Jean-François Manlay, Abdérafi Charki and Anthony DelamarreInternational Journal of Metrology and Quality Engineering 15 21 (2024)
https://doi.org/10.1051/ijmqe/2024016
Environment Mapping-Based Classification for Reverse Engineering Using Supervised Learning
Sukhyun LimElectronics 13 (20) 4031 (2024)
https://doi.org/10.3390/electronics13204031
On-Machine Measurement as a Factor Affecting the Sustainability of the Machining Process
Bartłomiej Krawczyk, Piotr Szablewski, Bartosz Gapiński, Michał Wieczorowski and Rehan KhanSustainability 16 (5) 2093 (2024)
https://doi.org/10.3390/su16052093
A Single-Frame Deflectometry Method for Online Inspection of Light-Transmitting Components
Ning Yan, Dongxue Wang, Lei Liu, Zhuotong Li, Shuaipeng Yuan and Xiaodong ZhangIEEE Transactions on Image Processing 33 3871 (2024)
https://doi.org/10.1109/TIP.2024.3414145
Multi-objective design optimisation of a delta coordinate measurement machine
Jakobus Murray Louw, Willis de Ronde, Stephen Marais, Thabisa Maweni, W. du Preez, T. Becker, R. Modiba, H. Chauke, T. Dzogbewu, R. Mostert, M. Maringa, H. Bissett, W. Koen, G. ter Haar, H. van der Merwe, J. Moema, N. Botha, C. Fisher and H. WangMATEC Web of Conferences 406 04003 (2024)
https://doi.org/10.1051/matecconf/202440604003
1121 (2023)
https://doi.org/10.1007/978-981-99-2074-7_58
253 (2023)
https://doi.org/10.1007/978-3-031-20752-5_16
1 (2023)
https://doi.org/10.1109/BulEF59783.2023.10406271
A novel approach to using artificial intelligence in coordinate metrology including nano scale
Michal Wieczorowski, Dawid Kucharski, Pawel Sniatala, Pawel Pawlus, Grzegorz Krolczyk and Bartosz GapinskiMeasurement 217 113051 (2023)
https://doi.org/10.1016/j.measurement.2023.113051
Surface form inspection with contact coordinate measurement: a review
Yijun Shen, Jieji Ren, Nuodi Huang, et al.International Journal of Extreme Manufacturing 5 (2) 022006 (2023)
https://doi.org/10.1088/2631-7990/acc76e
Handbook of Metrology and Applications
Meena Pant, Girija Moona, Leeladhar Nagdeve and Harish KumarHandbook of Metrology and Applications 1 (2023)
https://doi.org/10.1007/978-981-19-1550-5_58-1
Self super-resolution autostereoscopic 3D measuring system using deep convolutional neural networks
Sanshan Gao, Chi Fai Cheung and Da LiOptics Express 30 (10) 16313 (2022)
https://doi.org/10.1364/OE.454625
Anti-collision Device for the One-Dimensional Scanning Probe Fitted to a Measuring Machine
Huihui Tian, Hongxi Wang, Guanwei Wang and Wenhong LiangInternational Journal of Precision Engineering and Manufacturing 23 (11) 1349 (2022)
https://doi.org/10.1007/s12541-022-00705-3
Finding optimal correspondence sets for large digital metrology point clouds using anisotropic diffusion analogy
Hossein Gohari and Ahmad BarariInternational Journal of Computer Integrated Manufacturing 35 (4-5) 462 (2022)
https://doi.org/10.1080/0951192X.2021.1948103
Design and characteristic research of contact probe for high-precision 3D thread-measuring machine
Jing Yu, Xi-meng Lin, Yan-ling Yang and Jin-Hui CaiThe International Journal of Advanced Manufacturing Technology 119 (3-4) 2235 (2022)
https://doi.org/10.1007/s00170-021-08345-z
1 (2021)
https://doi.org/10.1109/IAI53119.2021.9619440
A virtual-electric-field-based method for distributing sampling points on the free-form surfaces of parts
Xincheng Lu, Buyun Sheng, Hui Wang, Ruiping Luo and Gaocai FuMeasurement Science and Technology 32 (11) 115007 (2021)
https://doi.org/10.1088/1361-6501/ac08c6
A Prediction Model for Additive Manufacturing of Inconel 718 Superalloy
Bharath Bhushan Ravichander, Atabak Rahimzadeh, Behzad Farhang, Narges Shayesteh Moghaddam, Amirhesam Amerinatanzi and Mehrshad MehrpouyaApplied Sciences 11 (17) 8010 (2021)
https://doi.org/10.3390/app11178010
Recent Research in Control Engineering and Decision Making
Mikhail Zakharchenko, Petr Salov, Liudmila Seliverstova, Andrew Kochetkov and Oleg ZakharovStudies in Systems, Decision and Control, Recent Research in Control Engineering and Decision Making 337 298 (2021)
https://doi.org/10.1007/978-3-030-65283-8_24
1 (2021)
https://doi.org/10.1109/NanofIM54124.2021.9737344
Interlaboratory Empirical Reproducibility Study Based on a GD&T Benchmark
Ali Aidibe, Souheil Antoine Tahan and Mojtaba Kamali NejadApplied Sciences 10 (14) 4704 (2020)
https://doi.org/10.3390/app10144704
Development of a Decision Support System to Enable Adaptive Manufacturing
Mumtahina Mahajabin Adrita, Alexander Brem, Patrick O’Neill, Eymard Gorman, Dominic O’Sullivan and Ken BrutonSmart and Sustainable Manufacturing Systems 4 (2) 146 (2020)
https://doi.org/10.1520/SSMS20190036
Comparing the probing systems of coordinate measurement machine: Scanning probe versus touch-trigger probe
Ali BastasMeasurement 156 107604 (2020)
https://doi.org/10.1016/j.measurement.2020.107604
Reviving the inter-laboratory comparison measurement results
Mahammed Arif Sanjid, Sanjoy K Ghoshal and Mrinal SenTransactions of the Institute of Measurement and Control 42 (4) 823 (2020)
https://doi.org/10.1177/0142331219879817
A Review of Diameter Measurement and a Proposal for the Improvement Thereof
M. Arif Sanjid, Sanjay Yadav, Mrinal Sen and Sanjoy K. GhoshalMAPAN 35 (2) 275 (2020)
https://doi.org/10.1007/s12647-019-00360-6
A Digital Twin for Integrated Inspection System in Digital Manufacturing
Hossein Gohari, Cody Berry and Ahmad BarariIFAC-PapersOnLine 52 (10) 182 (2019)
https://doi.org/10.1016/j.ifacol.2019.10.020
Optical inspection of cutting parts by 3D scanning
Dragan Lazarević, Bogdan Nedić, Srđan Jović, Živče Šarkoćević and Milan BlagojevićPhysica A: Statistical Mechanics and its Applications 531 121583 (2019)
https://doi.org/10.1016/j.physa.2019.121583
Automated Coordinate Measuring Machine Inspection Planning Knowledge Capture and Formalization
Dimitrios Anagnostakis, James Ritchie, Theodore Lim, Raymond Sung and Richard DewarJournal of Computing and Information Science in Engineering 18 (3) (2018)
https://doi.org/10.1115/1.4039194
Experimental Investigation of Dynamic Errors in Coordinate Measuring Machines for High Speed Measurement
Younes Echerfaoui, Abderrazak El Ouafi and Ahmed ChebakInternational Journal of Precision Engineering and Manufacturing 19 (8) 1115 (2018)
https://doi.org/10.1007/s12541-018-0132-x
Application of the sampling strategies in the inspection process
Syed Hammad Mian and Abdulrahman M Al-AhmariProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 231 (4) 565 (2017)
https://doi.org/10.1177/0954405416684157
10023 1002309 (2016)
https://doi.org/10.1117/12.2244876
Average surface roughness evaluation using 3-source photometric stereo technique
Thammarat Somthong and Qingping YangInternational Journal of Metrology and Quality Engineering 7 (4) 406 (2016)
https://doi.org/10.1051/ijmqe/2016024