Comparison of the GUM and Monte Carlo measurement uncertainty techniques with application to effective area determination in pressure standards
Int. J. Metrol. Qual. Eng., 1 1 (2010) 51-57
Published online: 2010-04-19
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Comparison of GUM and Monte Carlo Methods for Measurement Uncertainty Estimation of the Energy Performance Measurements of Gas Stoves
Bayu Utomo, Nanang Kusnandar, Himma Firdaus, Intan Paramudita, Iput Kasiyanto, Qudsiyyatul Lailiyah and Wahyudin P. SyamMeasurement Science Review 22 (4) 160 (2022)
https://doi.org/10.2478/msr-2022-0020
A Method for Generating a Sample of Two Uniformly Distributed Random Variables With Prescribed Coefficient of Correlation
Dorde Novakovic, Dragan Pejic, Tatjana Grbic, et al.IEEE Transactions on Instrumentation and Measurement 70 1 (2021)
https://doi.org/10.1109/TIM.2020.3041384
A Monte Carlo simulation investigation on the effect of the probability distribution of input quantities on the effective area of a pressure balance and its uncertainty
Jasveer Singh, L.A. Kumaraswamidhas, Neha Bura and Nita Dilawar SharmaMeasurement 172 108853 (2021)
https://doi.org/10.1016/j.measurement.2020.108853
Evaluation of effective area of air piston gauge with limitations in piston–cylinder dimension measurements
Vikas N Thakur, Felix Sharipov, Yuanchao Yang, et al.Metrologia 58 (3) 035004 (2021)
https://doi.org/10.1088/1681-7575/abe222
Evaluation of Uncertainty in the Effective Area and Distortion Coefficients of Air Piston Gauge Using Monte Carlo Method
Vikas N. Thakur, Sanjay Yadav and Ashok KumarMAPAN 34 (3) 371 (2019)
https://doi.org/10.1007/s12647-019-00336-6
A comparative investigation of pressure distortion coefficient of a pneumatic piston gauge and its associated uncertainty using varied approaches
Jasveer Singh, L. A. Kumaraswamidhas and Nita Dilawar SharmaAccreditation and Quality Assurance 24 (2) 105 (2019)
https://doi.org/10.1007/s00769-018-1355-3
Application of quantile functions for the analysis and comparison of gas pressure balance uncertainties
Vishal RamnathInternational Journal of Metrology and Quality Engineering 8 4 (2017)
https://doi.org/10.1051/ijmqe/2016020
Determination of pressure balance distortion coefficient and zero-pressure effective area uncertainties
V. RamnathInternational Journal of Metrology and Quality Engineering 2 (2) 101 (2011)
https://doi.org/10.1051/ijmqe/2011105