Open Access
| Issue |
Int. J. Metrol. Qual. Eng.
Volume 16, 2025
|
|
|---|---|---|
| Article Number | 4 | |
| Number of page(s) | 9 | |
| DOI | https://doi.org/10.1051/ijmqe/2025002 | |
| Published online | 17 March 2025 | |
- V. Singh, M. Law, Machine tool multibody dynamic model updating using vision-based modal analysis[J], Manufac. Technol. Today 22, 23–28 (2023) [Google Scholar]
- S. Liu, W. Zheng, Priority order recognition method of module redesign for the CNC machine tool product family to improve green performance[J], Trans. Canadian Soc. Mech. Eng. 45, 513–531 (2021) [CrossRef] [Google Scholar]
- H. Guo, J. Zhang, P. Feng et al., A virtual material-based static modeling and parameter identification method for a BT40 spindle-holder taper joint [J], Int. J. Adv. Manufac. Technol. 81, 307–314 ( 2015) [CrossRef] [Google Scholar]
- K. Wang, C. Yang, Structural design optimization of movable-column horizontal machining center based on integral stiffness analysis and sensor measurement[J], Sensors Mater. Int. J. Sensor Technol. 35, 4 (2023) [Google Scholar]
- Y. Chang, J. Ding, H. Fan et al., Interfacial micromechanics modeling for bolted joints in ultra-precision machine tools, J. Mech. Sci. Technol. 37, 4179–4191 (2023) [CrossRef] [Google Scholar]
- K. Okamura, T. Matsubara, K. Akada, Transient response analysis of hydraulic feed system of machine tool[J], J. Japan Soc. Precision Eng. 37, 666–671 (1971) [CrossRef] [Google Scholar]
- M. Yoshimura, Optimal design in the product planning phase (Optimal Design, F14 Planning of the Mechanical Mechanics, Measurement and Control Division) [M]. 2017 [Google Scholar]
- C. Dogariu, D. Bardac, Prediction of the structure dynamic behavior of high speed turning machine spindles[J], Applied Mech. Mater. 555, 3201 (2014) [Google Scholar]
- R. Chen, X. Wang, C. Du et al., Stiffness model and experimental study of hydrostatic spindle system considering rotor swing. Shock Vibration[J] 5901432 (2020) [Google Scholar]
- B. Revanasiddesh, A. Taj, N. Kumar et al., Extraction of modal parameters of CNC lathe bed using finite element and experimental method[J], Mater. Today Proc. 24, 398–405 (2020) [CrossRef] [Google Scholar]
- T. Guo, L. Meng, X. Hua et al., Research on the dynamic identification method of weak parts in cantilever structures[J], Sci. Prog. 104, 28988–29003 (2021) [Google Scholar]
- K. Liu, J. Liu, L. Wang, Y. Zhao, F. Li, A modified model for identifying the characteristic parameters of machine joint interfaces[J], Appl. Sci. 13, 11680 (2023) [CrossRef] [Google Scholar]
- S. Wu, W. Lei, T. Yu, Z. Dong, T. Liu, Effect of the stiffness of the turntable bearing joint on the dynamic characteristics of the five-axis machine tool rotary system[J], Machines 11, 389 (2023) [CrossRef] [Google Scholar]
- Z. Gao, Y. Zhang, Y. Xi et al., Investigation of normal dynamic contact stiffness and damping characteristics in mixed lubrication for non-gaussian rough surfaces[J], Mech. Solids 58, 2144–2161 (2023) [CrossRef] [Google Scholar]
- G. Song, C. Li, C. Liu et al., Modeling and analysis of nonlinear dynamics of machine tool sliding guide[J], Nonlinear Dyn. 112, 8171–8197 (2024) [CrossRef] [Google Scholar]
- H. Huynh, Y. Altintas, Multibody dynamic modeling of five-axis machine tool vibrations and controller[J], CIRP Ann. 71, 325–328 (2022) [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.