Open Access
Int. J. Metrol. Qual. Eng.
Volume 5, Number 4, 2014
Article Number 408
Number of page(s) 5
Published online 02 December 2014
  1. Y. Ishii, New method for interometric measurement of gauge blocks without wringing onto a platen. Metrologia 35, 67 (1998) [CrossRef] [Google Scholar]
  2. A. Abdelaty, A. Walkov, P. Franke, R. Schödel, Challenges on double ended gauge block interferometry unveiled by the study of a prototype at PTB, Metrologia 49, (2012) [Google Scholar]
  3. ISO 3650:1998 (E),–#"iso:std:iso:3650:ed-2:v1:en [Google Scholar]
  4. G.J. Siddal, P.C.T. Willey, Flat surface wringing and contact error variability, J. Phys. D 3, 8 (1970) [CrossRef] [Google Scholar]
  5. E.G. Thwaite, Phase correction in the interferometric measurement of end standards, Metrologia 14, 53–62 (1978) [CrossRef] [Google Scholar]
  6. K.V. Rajesh, A study of gage block wringing. Center for precision metrology, university of north Carolina at Charlotta, 2005.˙2005/POSTERS/3METRO/6SURF/1831.PDF [Google Scholar]
  7. J.E. Dekker, P. Franke, G. Boensch, On the influence of gauge blocks roughness, Proc. SPIE 5879, 587907, 2005 [Google Scholar]
  8. A. Titov, I. Malinovsky, A. Massone, Gauge block measurements with nanometre uncertainty, Metrologia 37, 121 (2000) [CrossRef] [Google Scholar]
  9. A. Titov, I. Malinovsky, A. Massone, Realizing subnanometer accuracy level in gauge block measurements, Proc. SPIE 3477 (1998) [Google Scholar]
  10. Bonsch, Concerning two recent papers on gauge block measurement by interferometry, Metrologia 39, 101 (2002) [CrossRef] [Google Scholar]
  11. Bonsch, Interferometric calibration of an integrating sphere for the determination of the roughness correction of gauge blocks, Proc. SPIE 3477, 152 (1998) [CrossRef] [Google Scholar]
  12. Tesa gauge block interferometer manual [Google Scholar]
  13. O.W. Cramer, G. Thompson, R. Turner, An instrument for measuring end bars, S. Afr. J. Phys. 10, 1 (1987) [Google Scholar]
  14. O. Kruger, T&M conference, 2009 [Google Scholar]
  15. Z. Buchta, S. Řeřucha, B. Mikel, M. Čížek, J. Lazar, O. Číp, Novel principle of contactless gauge block calibrations, Sensors 3, 3350–3358 (2012) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.