Open Access
Int. J. Metrol. Qual. Eng.
Volume 5, Number 3, 2014
Article Number 301
Number of page(s) 5
Published online 03 November 2014
  1. World Steel Association,
  2. D.S. Harvey, K. Baldry, A. Bishop, Radiation safety following accidental melting of radioactive sources at steelplants. Rev. Metall. 101, 285–289 (2004) [CrossRef] [EDP Sciences]
  3. B. Das, S. Prakash, P.S.R. Reddy, V.N. Misra, An overview of utilization of slag and sludge from steel industries, Resour. Conserv. Recycl. 50, 40–57 (2007) [CrossRef]
  4. Ionising radiation metrology for the metallurgical industry,
  5. EMRP, European Research Metrology Programme,
  6. UNECE, EC, IAEA, Report on the Improvement of the Management of Radiation Protection Aspects in the Recycling of Metal Scrap. ECE/TRADE/278, 2001
  7. K. Baldry, D.S. Harvey, A. Bishop, Accidental Melting of Radioactive Sources, Proceedings of IRPA 11 (Madrid, 2011)
  10. ISO, Certification of reference materials, General and statistical principles, Guide 35. Int. Organ. Stand., Geneva, Switzerland (2006)
  11. ISO, General requirements for the competence of reference material producer – Guide 34. Int. Organ. Stand., Geneva, Switzerland (2000)
  12. M. Sahagia, A. Luca, R.M. Mãrgineanu, N. Navarro, V. Peyrés, B. Pérez López, E. Garcia-Toraño, J.A. Suárez-Navarro, Determination of the content of natural radionuclides in furnace slag used for the preparation of standard sources. J. Radioanal. Nucl. Chem. 298, 2037–2042 (2013) [CrossRef]
  13. A. Shakhashiro, A.M. Gondin da Fonseca Azeredo, U. Sansone, A. Fajgelj, Matrix materials for proficiency testing: optimization of a procedure for spiking soil with gamma-emitting nuclides. Anal. Bioanal. Chem. 387, 2509–2515 (2007) [CrossRef] [PubMed]
  14. M. Mejuto, M.T. Crespo, E. García-Toraño, V. Peyrés, M. Roteta, L. Pérez del Villar, Preparation and characterization of a 226Ra spiked slag as reference material for radioactive control of steelworks, Appl. Radiat. Isot. 94, 166–174 (2014) [CrossRef] [PubMed]
  15. S. Pommé, Determination of a reference value, associated standard uncertainty and degrees of equivalence, JRC Scientific and Policy report EUR 25355 EN, 2012, ISBN 978-92-79-25104-7
  16. ISO, ISO/IEC 13528, Statistical methods for use in proficiency testing by interlaboratory comparisons. Int. Organ. Stand., Geneva, Switzerland (2005)

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.