| Issue |
Int. J. Metrol. Qual. Eng.
Volume 2, Number 1, 2011
|
|
|---|---|---|
| Page(s) | 1 - 4 | |
| DOI | https://doi.org/10.1051/ijmqe/2011001 | |
| Published online | 29 June 2011 | |
Traceability and method validation in a photometry laboratory
1
Laboratório de Fotometria, Radiometria e Radiofrequências,
IPQ, Portugal
2
Directora do Departamento de Metrologia, IPQ,
Portugal
⋆ Correspondence:
opellegrino@mail.ipq.pt
Received:
7
July
2010
Accepted:
22
September
2010
This article displays how the photometry laboratory of the Portuguese Institute for Quality complies with the measurement traceability and method validation, the technical requirements 5.4 and 5.6 of the ISO/IEC 17025. After the presentation of the existing means and the way the metrological traceability is obtained, a short introduction to the internal validation of the measurement method is displayed for the luminous intensity, the illuminance and the illuminance responsivity.
Key words: Luminous intensity / illuminance / illuminance responsivity / metrological traceability / internal verification of measurement method
© EDP Sciences 2011
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.