| Issue |
Int. J. Metrol. Qual. Eng.
Volume 1, Number 2, 2010
|
|
|---|---|---|
| Page(s) | 67 - 70 | |
| DOI | https://doi.org/10.1051/ijmqe/2010015 | |
| Published online | 17 December 2010 | |
Verification of blackbodies emissivity
Slovak Institute of Metrology, Slovakia
⋆ Correspondence:
nemecek@smu.gov.sk
⋆⋆ Correspondence :
metrodat@netax.sk
Received:
31
May
2010
Accepted:
19
August
2010
Blackbody models are used as referential temperature measuring gauges for radiation thermometers calibration. Their emissivity is usually determined by calculation. The presented paper describes an experimental device used to measure local effective emissivities, using an optical radiometer. The methods to measure and evaluate emissivity and temperature are described. The results are compared with the theoretical model of a cylindrical-conical cavity used to calibrate radiation thermometers.
Key words: English / CAFMET2010 / papers, emissivity of blackbodies
© EDP Sciences 2010
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.