EDP Sciences logo
Submit your paper
Search
Menu
All issues Int. J. Metrol. Qual. Eng., 6 2 (2015) 205 Article references
Error
  • The authentification system partialy failed, sorry for the inconvenience. Please try again later.

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Conformity assessment of measuring equipment within the process of calibration on the example of geometrical product specification measuring instruments

N. Yu. Efremova
Izmeritel`naya Tekhnika 74 (2) 37 (2025)
https://doi.org/10.32446/0368-1025it.2025-2-37-46

Robust approach connected to measurement uncertainty for establishing acceptance limits in custody transfer measurements within the oil and gas industry

Guilherme Lucarelli Orsay and Elcio Cruz de Oliveira
Chemical Engineering Science 318 122248 (2025)
https://doi.org/10.1016/j.ces.2025.122248

Conformity assessment of measuring equipment as part of calibration on the example of instruments measuring geometrical product specifications

Nadezhda Yu. Efremova
Measurement Techniques 68 (3-4) 161 (2025)
https://doi.org/10.1007/s11018-025-02437-y

Modified short-run statistical process control for test and measurement process

Chin Kok Koh, Jeng Feng Chin and Shahrul Kamaruddin
The International Journal of Advanced Manufacturing Technology 100 (5-8) 1531 (2019)
https://doi.org/10.1007/s00170-018-2776-1

Modified SPC for short run test and measurement process in multi-stations

C K Koh, J F Chin and S Kamaruddin
IOP Conference Series: Materials Science and Engineering 328 012009 (2018)
https://doi.org/10.1088/1757-899X/328/1/012009

An overview of Quality Management System implementation in a research laboratory

Valérie Molinéro-Demilly, Abdérafi Charki, Christine Jeoffrion, et al.
International Journal of Metrology and Quality Engineering 9 2 (2018)
https://doi.org/10.1051/ijmqe/2017025

Critical analysis of the acceptance criteria used in measurement systems evaluation

Suelí Fischer Beckert and Wagner Saucedo Paim
International Journal of Metrology and Quality Engineering 8 23 (2017)
https://doi.org/10.1051/ijmqe/2017016

Smart metrology: the importance of metrology of decisions in the big data era

Annarita Lazzari, Jean-Michel Pou, Christophe Dubois and Laurent Leblond
IEEE Instrumentation & Measurement Magazine 20 (6) 22 (2017)
https://doi.org/10.1109/MIM.2017.8121947