Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

This article has been cited by the following article(s):

In-process calibration of smart structures produced by incremental forming

Nassr Al-Baradoni, Martin Krech and Peter Groche
Production Engineering 15 (1) 79 (2021)
DOI: 10.1007/s11740-020-01002-6
See this article

Features calibration of the dynamic force transducers

M Yu Prilepko and V G Lysenko
Journal of Physics: Conference Series 998 012025 (2018)
DOI: 10.1088/1742-6596/998/1/012025
See this article

Engineering Metrology and Measurements

D. G. Mahto
SSRN Electronic Journal (2016)
DOI: 10.2139/ssrn.3015752
See this article

Absolute quasi-static calibration method of piezoelectric high-pressure sensor based on force sensor

Tingwei Gu, Fei Shang, Deren Kong and Chundong Xu
Review of Scientific Instruments 90 (5) 055111 (2019)
DOI: 10.1063/1.5083895
See this article

Sensors and Instrumentation, Volume 5

Leonard Klaus, Michael Kobusch and Thomas Bruns
Conference Proceedings of the Society for Experimental Mechanics Series, Sensors and Instrumentation, Volume 5 61 (2015)
DOI: 10.1007/978-3-319-15212-7_8
See this article

Two-Stage Coaxial Inductive Voltage Divider and Its Calibration Setup for Use Between 1 and 100 kHz

Marc Florian Beug and Harald Moser
IEEE Transactions on Instrumentation and Measurement 64 (6) 1670 (2015)
DOI: 10.1109/TIM.2014.2381731
See this article

Traceable dynamic calibration of force transducers by primary means

Nicholas Vlajic and Ako Chijioke
Metrologia 53 (4) S136 (2016)
DOI: 10.1088/0026-1394/53/4/S136
See this article

Development of a novel device for analysis of high-speed cutting processes considering the influence of dynamic factors

Ondrej Dvoracek, Daniel Lechowicz, Thomas Krenke, et al.
The International Journal of Advanced Manufacturing Technology 113 (5-6) 1685 (2021)
DOI: 10.1007/s00170-021-06769-1
See this article

Investigation of vibration effect on dynamic calibration of pressure sensors based on shock tube system

Kuan Diao, Zhenjian Yao, Zhongyu Wang, et al.
Measurement 149 107015 (2020)
DOI: 10.1016/j.measurement.2019.107015
See this article

Optimization of an impulse pressure generator based on the drop-weight method

Rudi Anggoro Samodro and In-Mook Choi
Review of Scientific Instruments 90 (9) 095111 (2019)
DOI: 10.1063/1.5108865
See this article

Probabilistic Framework for Dynamic Measurements for Markovian Models With a Uniform Prior for the Measurand

Giovanni Battista Rossi, Francesco Crenna and Alice Palazzo
IEEE Transactions on Instrumentation and Measurement 68 (11) 4357 (2019)
DOI: 10.1109/TIM.2018.2889362
See this article

A fractional-order accumulative regularization filter for force reconstruction

Jiang Wensong, Wang Zhongyu and Lv Jing
Mechanical Systems and Signal Processing 101 405 (2018)
DOI: 10.1016/j.ymssp.2017.09.001
See this article

Comparing the adiabatic and isothermal pressure dependence of the index of refraction in a drop-weight apparatus

O. Slanina, S. Quabis, S. Derksen, J. Herbst and R. Wynands
Applied Physics B 126 (11) (2020)
DOI: 10.1007/s00340-020-07519-z
See this article

Calibration of bridge-, charge- and voltage amplifiers for dynamic measurement applications

Leonard Klaus, Thomas Bruns and Henrik Volkers
Metrologia 52 (1) 72 (2015)
DOI: 10.1088/0026-1394/52/1/72
See this article

Dynamic characterization of multi-component sensors for force and moment

Jan Nitsche, Rolf Kumme and Rainer Tutsch
Journal of Sensors and Sensor Systems 7 (2) 577 (2018)
DOI: 10.5194/jsss-7-577-2018
See this article

A Study on Characterization of Impulses Pressure Generator by a Drop Weight Method

Rudi Anggoro Samodro and In-Mook Choi
Journal of Physics: Conference Series 1065 162012 (2018)
DOI: 10.1088/1742-6596/1065/16/162012
See this article

Towards a standard for the dynamic measurement of pressure based on laser absorption spectroscopy

K O Douglass and D A Olson
Metrologia 53 (3) S96 (2016)
DOI: 10.1088/0026-1394/53/3/S96
See this article

Dynamic calibration of piezoelectric transducers for ballistic high-pressure measurement

Lamine Elkarous, Cyril Robbe, Marc Pirlot and Jean-Claude Golinval
International Journal of Metrology and Quality Engineering 7 (2) 201 (2016)
DOI: 10.1051/ijmqe/2016004
See this article

Pressure prediction model based on artificial neural network optimized by genetic algorithm and its application in quasi-static calibration of piezoelectric high-pressure sensor

Tingwei Gu, Deren Kong, Jian Jiang, Fei Shang and Jing Chen
Review of Scientific Instruments 87 (12) 125005 (2016)
DOI: 10.1063/1.4972826
See this article

Analysis for dynamic metrology

Andrew Dienstfrey and Paul D Hale
Measurement Science and Technology 25 (3) 035001 (2014)
DOI: 10.1088/0957-0233/25/3/035001
See this article

Calibration of Dynamic Force Sensors by the Deformation Method

F. V. Bulygin and M. Yu. Prilepko
Measurement Techniques 62 (6) 490 (2019)
DOI: 10.1007/s11018-019-01651-9
See this article

Numerical modeling and analysis of the pressure pulses generator for the dynamic calibration of high-pressure transducers

Lamine Elkarous, Abdallah Nasri and Rachid Nasri
Applied Acoustics 147 56 (2019)
DOI: 10.1016/j.apacoust.2018.04.015
See this article

31st International Symposium on Shock Waves 1

M. Lavayssière, J. Luc and A. Lefrançois
31st International Symposium on Shock Waves 1 319 (2019)
DOI: 10.1007/978-3-319-91020-8_36
See this article

Towards a shock tube method for the dynamic calibration of pressure sensors

Stephen Downes, Andy Knott and Ian Robinson
Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 372 (2023) 20130299 (2014)
DOI: 10.1098/rsta.2013.0299
See this article

Design of a New Dual-Mode Torque Standard Machine Using the Principle of the Kibble Balance

MyeongHyeon Kim
IEEE Transactions on Instrumentation and Measurement 70 1 (2021)
DOI: 10.1109/TIM.2021.3060574
See this article