Clustering of similar processes for the application of statistical process control in small batch and job production
Int. J. Metrol. Qual. Eng., 7 4 (2016) 404
Published online: 2016-11-24
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Potential of prediction in manufacturing process and inspection sequences for scrap reduction
Anna-Lena Knott, Lars Stauder, Xiaoyi Ruan, Robert H. Schmitt and Thomas BergsCIRP Journal of Manufacturing Science and Technology 44 55 (2023)
https://doi.org/10.1016/j.cirpj.2023.04.012
Analysis of deviation from nominal control chart performance on short production runs
Márcio Ricardo Morelli de Meira, Pedro Carlos Oprime and Ricardo Coser MergulhãoProduction 32 (2022)
https://doi.org/10.1590/0103-6513.20210092
Comparison of grouping algorithms to increase the sample size for statistical process control
Jonathan Simon Greipel, Gina Nottenkämper and Robert Heinrich SchmittSN Applied Sciences 2 (5) (2020)
https://doi.org/10.1007/s42452-020-2728-x
Anomaly Detection of Manufacturing Process for Multi-Variety and Small Batch Production
X Chen, F Chen and L YinJournal of Physics: Conference Series 1487 (1) 012007 (2020)
https://doi.org/10.1088/1742-6596/1487/1/012007
Comparison of applicable adjustment procedures for very small batches
Daniel Duret and Alain SergentInternational Journal of Metrology and Quality Engineering 10 6 (2019)
https://doi.org/10.1051/ijmqe/2019001
An overview of Quality Management System implementation in a research laboratory
Valérie Molinéro-Demilly, Abdérafi Charki, Christine Jeoffrion, et al.International Journal of Metrology and Quality Engineering 9 2 (2018)
https://doi.org/10.1051/ijmqe/2017025