New temperature reference cells for calibrating CSPRTs under adiabatic conditions
Int. J. Metrol. Qual. Eng., 5 4 (2014) 401
Published online: 2014-12-02
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Precise temperature controlling algorithm for metrological adiabatic calorimeters based on proportional-integration (α) thermal energy
A. El Matarawy and Eman Mohy El-DienJournal of Thermal Analysis and Calorimetry 147 (5) 3721 (2022)
https://doi.org/10.1007/s10973-021-10806-2
Testing the reliability of new developed firmware for controlling NIS climatic chamber
A. El-Matarawey, Doaa.M. Abd-ElGalil and Eman.M. El-DienMeasurement 199 111366 (2022)
https://doi.org/10.1016/j.measurement.2022.111366
Comparison of the realization of water triple point metallic cell through its preparation techniques in new modified adiabatic calorimeter at NIS-Egypt
A. El MatarawyJournal of Thermal Analysis and Calorimetry 136 (5) 2131 (2019)
https://doi.org/10.1007/s10973-018-7804-8
The ITS-90 after definition of neon isotopic reference composition: extent of the isotopic effect tested on previous inter-comparison results
Franco Pavese, Anna Szmyrka-Grzebyk and Peter P.M. SteurInternational Journal of Metrology and Quality Engineering 8 27 (2017)
https://doi.org/10.1051/ijmqe/2017022
New temperature controlling mechanism for thermal metrology regulation at NIS-Egypt
A. El MatarawyJournal of Thermal Analysis and Calorimetry 129 (3) 1799 (2017)
https://doi.org/10.1007/s10973-017-6340-2
New adiabatic calorimeter for realization the triple point of water in metallic-sealed cell at NIS-Egypt
Ahmed Ali El Matarawy and Mohamed Gamal AhmedInternational Journal of Metrology and Quality Engineering 7 (1) 107 (2016)
https://doi.org/10.1051/ijmqe/2016005