Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Type A standard uncertainty evaluation in one measurement through uncertainty propagation from voxel values’ distribution for computed tomography metrology

Dongsheng Ou, Yongshun Xiao, Dini Lan and Yingxin Wang
Measurement Science and Technology 35 (6) 065015 (2024)

Establishment of X-ray computed tomography traceability for additively manufactured surface texture evaluation

Wenjuan Sun, Claudiu Giusca, Shan Lou, Xiuyuan Yang, Xiao Chen, Tony Fry, Xiangqian Jiang, Alan Wilson, Stephen Brown and Hal Boulter
Additive Manufacturing 50 102558 (2022)

Advances in the metrological traceability and performance of X-ray computed tomography

Wim Dewulf, Harald Bosse, Simone Carmignato and Richard Leach
CIRP Annals 71 (2) 693 (2022)

Assessing the effect of sample orientation on dimensional X-ray computed tomography through experimental and simulated data

Herminso Villarraga-Gómez, Artem Amirkhanov, Christoph Heinzl and Stuart T. Smith
Measurement 178 109343 (2021)

Review of porosity uncertainty estimation methods in computed tomography dataset

Victory A J Jaques, Anton Du Plessis, Marek Zemek, et al.
Measurement Science and Technology 32 (12) 122001 (2021)

A Systems Approach to Estimating the Uncertainty Limits of X-Ray Radiographic Metrology

Robert M. Panas, Jefferson A. Cuadra, K. Aditya Mohan and Rosa E. Morales
Journal of Micro and Nano-Manufacturing 9 (1) (2021)

Empirical approaches to uncertainty analysis of X-ray computed tomography measurements: A review with examples

Herminso Villarraga-Gómez, Jeffery D. Thousand and Stuart T. Smith
Precision Engineering 64 249 (2020)

Application of compact laser-driven accelerator X-ray sources for industrial imaging

J.-N. Gruse, M.J.V. Streeter, C. Thornton, et al.
Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 983 164369 (2020)

CT image denoising using multivariate model and its method noise thresholding in non-subsampled shearlet domain

Manoj Diwakar and Prabhishek Singh
Biomedical Signal Processing and Control 57 101754 (2020)

A new exponentially directional weighted function based CT image denoising using total variation

Manoj Kumar and Manoj Diwakar
Journal of King Saud University - Computer and Information Sciences 31 (1) 113 (2019)

Surface extraction algorithm influence on the uncertainty assessment and tolerance compliance of computed tomography measurements

José A. Yagüe-Fabra, R. Jiménez, S. Ontiveros, M. Torralba and G. Tosello
Procedia CIRP 75 119 (2018)

Accuracy of X-ray computed tomography for dimensional metrology with employment of a new threshold selection method

Tomasz Kowaluk and Adam Wożniak
Journal of X-Ray Science and Technology 26 (5) 833 (2018)

A comprehensive review of denoising techniques for abdominal CT images

Ravinder Kaur, Mamta Juneja and A. K. Mandal
Multimedia Tools and Applications 77 (17) 22735 (2018)

Comparison of surface extraction techniques performance in computed tomography for 3D complex micro-geometry dimensional measurements

Marta Torralba, Roberto Jiménez, José A. Yagüe-Fabra, Sinué Ontiveros and Guido Tosello
The International Journal of Advanced Manufacturing Technology 97 (1-4) 441 (2018)

Realization of Industry 4.0 with high speed CT in high volume production

Marcin B. Bauza, Jason Tenboer, Ming Li, et al.
CIRP Journal of Manufacturing Science and Technology 22 121 (2018)

Industrial needs and available techniques for geometry assurance for metal AM parts with small scale features and rough surfaces

Johan Berglund, Rikard Söderberg and Kristina Wärmefjord
Procedia CIRP 75 131 (2018)

Dimensional metrology with X-ray CT: A comparison with CMM measurements on internal features and compliant structures

Herminso Villarraga-Gómez, ChaBum Lee and Stuart T. Smith
Precision Engineering 51 291 (2018)

Phase-preserving approach in denoising computed tomography medical images

Zohair Al-Ameen, Ghazali Sulong, Amjad Rehman, et al.
Computer Methods in Biomechanics and Biomedical Engineering: Imaging & Visualization 5 (1) 16 (2017)

Novel experimental technique for 3D investigation of high-speed cavitating diesel fuel flows by X-ray micro computed tomography

M. Lorenzi, N. Mitroglou, M. Santini and M. Gavaises
Review of Scientific Instruments 88 (3) (2017)

Computed tomography approach to quality control of the Inconel 718 components obtained by additive manufacturing (SLM)

N. Ortega, S. Martínez, I. Cerrillo, A. Lamikiz and E. Ukar
Procedia Manufacturing 13 116 (2017)

Experimental Approach for the Uncertainty Assessment of 3D Complex Geometry Dimensional Measurements Using Computed Tomography at the mm and Sub-mm Scales

Roberto Jiménez, Marta Torralba, José Yagüe-Fabra, Sinué Ontiveros and Guido Tosello
Sensors 17 (5) 1137 (2017)

Measurement accuracy in X-ray computed tomography metrology: Toward a systematic analysis of interference effects in tomographic imaging

Jochen Hiller and Peter Hornberger
Precision Engineering 45 18 (2016)

Quantifying the Contribution of Post-Processing in Computed Tomography Measurement Uncertainty

Alessandro Stolfi, Mary Kathryn Thompson, Lorenzo Carli and Leonardo De Chiffre
Procedia CIRP 43 297 (2016)

Quantitative analysis of scaling error compensation methods in dimensional X-ray computed tomography

P. Müller, J. Hiller, Y. Dai, et al.
CIRP Journal of Manufacturing Science and Technology 10 68 (2015)

Deblurring computed tomography medical images using a novel amended Landweber algorithm

Zohair Al-Ameen and Ghazali Sulong
Interdisciplinary Sciences: Computational Life Sciences (2015)

Deblurring Computed Tomography Medical Images Using a Novel Amended Landweber Algorithm

Zohair Al-Ameen and Ghazali Sulong
Interdisciplinary Sciences: Computational Life Sciences 7 (3) 319 (2015)

A new method of performance verification for x-ray computed tomography measurements

F Léonard, S B Brown, P J Withers, P M Mummery and M B McCarthy
Measurement Science and Technology 25 (6) 065401 (2014)

Failure analysis of irreversible changes in the construction of rubber–textile conveyor belt damaged by sharp-edge material impact

Gabriel Fedorko, Vieroslav Molnar, Anna Grincova, et al.
Engineering Failure Analysis 39 135 (2014)

Estimation of measurement uncertainties in X-ray computed tomography metrology using the substitution method

P. Müller, J. Hiller, Y. Dai, et al.
CIRP Journal of Manufacturing Science and Technology 7 (3) 222 (2014)

Attenuating noise from computed tomography medical images using a coefficients‐driven total variation denoising algorithm

Zohair Al‐Ameen and Ghazali Sulong
International Journal of Imaging Systems and Technology 24 (4) 350 (2014)

Measurement uncertainty evaluation in dimensional X-ray computed tomography using the bootstrap method

Jochen Hiller, Gianfranco Genta, Giulio Barbato, Leonardo De Chiffre and Raffaello Levi
International Journal of Precision Engineering and Manufacturing 15 (4) 617 (2014)

Research Developments in Computer Vision and Image Processing

Tushar Kanti Bera and J. Nagaraju
Advances in Computational Intelligence and Robotics, Research Developments in Computer Vision and Image Processing 235 (2014)

Uncertainty determination and quantification for dimensional measurements with industrial computed tomography

Wim Dewulf, Kim Kiekens, Ye Tan, Frank Welkenhuyzen and Jean-Pierre Kruth
CIRP Annals 62 (1) 535 (2013)